Bedienungsanleitung Korg Kross 2 (Seite 118 von 152) (Englisch)

707348

118

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Using Drum Kits

112

Editing a Drum Kit

Basic Editing

1. Select the Program that you wish to use while editing

the Drum Kit.

2. Access the DRUM KIT> DS 1 page.

Press the EXIT button ( ) and the SEQ button

( ). Press the MENU button to access the menu,

use the PAGE– (▲) or PAGE+ (▼) buttons to select

DRUM KIT, then press the MENU (OK) button. (If a

different page is shown, use the PAGE– (▲) button to

select the appropriate page.)

3. On the top line of the display, use “Drum Kit Select”

to select the drum kit that you want to edit.

GM drum kits 58 (GM)–66 (GM) cannot be selected

here. (It is not possible to edit or write a GM drum kit.)

If you wish to modify the settings of one of the drum

kits 58 (GM)–66 (GM), you can use Copy Drum Kit

function to copy it to 00 (INT)–57 (USER), and then

edit the copy.

4. Use the Key parameter to select the note that you wish

to edit.

To select a key, you can use any of the standard VALUE

dial etc.

If you select KEY and press the ENTER button, you’ll be

able to use the keyboard to specify the note number. Press

the ENTER button once again to confirm.

5. Use the Assign check box to specify whether the key

will have its own settings, or use the same settings as

the next higher note.

If Assign is checked, the key will have its own settings.

This is the default.

If Assign is not checked, the key won’t have its own

settings. Instead, it will use the same settings as the next

higher note–except that the drumsamples will be played

at a lower pitch. The amount of pitch change depends on

the Pitch Slope parameter, on the P-PITCH> BASIC

page.

Use this setting when you want only to change the pitch,

such as with tom or cymbal sounds.

Tip: If you want to copy the settings of one key to a different

drum sample, use the Copy Key Setup function.

Velocity crossfade settings

For this key, let’s create a simple velocity crossfade between

two stereo drumsamples.

1. In the DRUM KIT> DS 1 and DS 2 pages, turn

Drumsample 1 and 2 on.

If it is off, select the button and press the ENTER button

to turn it on.

2. In the same way, make sure that Drumsamples 3–4

are Off.

3. Select Stereo as the Bank for Drumsample1 and

Drumsample2.

Drumsamples come in several types: RomM (ROM

Mono) or RomS (ROM Stereo).

RomM (ROM Mono) are mono drumsamples, and RomS

(ROM Stereo)are stereo drumsamples. Stereo

drumsamples use twice as many voices as mono

drumsamples.

4. Select a drum sample. Select Drumsample 1, and

press the ENTER button.

A list of drum samples organized by category will appear.

Use the cursor buttons ◄► to view the list for other

categories.

5. Use the cursor buttons to select a drum sample name

from the list in the display.

6. Press the ENTER button to change the setting.

7. Switch to the DRUM KIT> DS 2 page, and specify

Drumsample 2 in the same way.

Now that you’ve assigned Drumsamples to Drumsample1

and Drumsample2, let’s set up the velocity ranges and

crossfades.

8. For Drumsample 2, set Bottom Vel. to 1.

Turn Xfade Off.

Use the cursor button ▼ to scroll the page.

KEY AssignDrum Kit Select

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg Kross 2 Seite 118

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg Kross 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info