Bedienungsanleitung Korg PA600QT (Seite 15 von 408) (Englisch)

668718

Zoom out

Zoom in

Vorherige Seite

1/408

Nächste Seite

Overview

Front Panel

Introduction

MEMORY

This button allows you to choose whether the Lower notes and/

or chord triggering the accompaniment must remain in memory

after raising your hand from the keyboard.

On Depending on the setting of the “Memory Mode”

parameter (in the Global > Mode Preferences >

Style Play), the sound on the left of the split point

(Lower), and/or the chords for the automatic

accompaniment can kept in memory even when

you raise your hand from the keyboard.

Off Both the sound and chord are released as soon as

you raise your hand from the keyboard.

Note: This function can be automatically activated by playing the

keyboard harder, by setting the “Velocity Control” parameter (in

the Global > Mode Preferences > Style Play page).

You can jump to the Global > Mode Preferences > Style

Play page by keeping SHIFT pressed and pressing the MEMORY

button.

MAN. BASS (Manual Bass)

This button turns the Manual Bass function on or off.

On The automatic accompaniment stops playing

(except for the Drum and Percussion tracks), and

you can manually play the Bass track on the

Lower part of the keyboard. You can start the

automatic accompaniment again after pressing

this button to turn off the Manual Bass function.

Off The bass track is automatically played by the Style.

Note: When you press the MANUAL BASS button, the Bass track

volume is automatically set to its maximum value. The volume is

automatically set back to the original value when the MANUAL

BASS button is deactivated.

While a Style is in play, you can use this section as a Chord

Sequencer and record a looping sequence of chords. The chords

will drive the arranger, leaving your hands free for solo playing.

RECORD (MEMORY + MAN. BASS): Press these buttons

together to start recording the Chord Sequence. Recording will

start from the next measure. Press these buttons again to stop

recording.

PLAY/STOP (ACCOMP. + MEMORY): Press these buttons

together to let the Chord Sequence play in loop, and automati-

cally drive the arranger. The Chord Sequence will start on the

next measure. Press these buttons again to stop the sequence.

The Chord Sequence will remain in memory up until you record

a new Chord Sequence, or you turn the Pa600 off.

Pads

Here you can play (and stop) the Pads, i.e. single sounds or loop-

ing sequences.

PAD 1-4

STOP

Each Pad button corresponds to a dedicated Pad track. Use these

buttons to trigger up to four sounds or sequences at the same

time.

• Press a single PAD button to trigger a single sound or

sequence.

• Press more PAD buttons to trigger several sounds or

sequences.

The sequences will play up to the end. Then, they will stop or

continue repeating, depending on their “One Shot/Loop” status

(see the “Pad Type” parameter in the Pad Record mode).

You can stop all sequences, or just some of them, by pressing the

STOP button of the PAD section:

• Press STOP to stop all sequences at once.

• Keep STOP pressed and press one (or more) of the PAD

buttons to stop the corresponding sequence(s).

• Press one of the ENDING buttons to stop both the accom-

paniment and the Pads at the same time.

About Pad synchronization. In Style Play mode, Pads are syn-

chronized to the Style’s Tempo. In Song Play mode, they are syn-

chronized to the Player.

Note: There is no synchronization with MP3 files. Pads can only

be synchronized to the Tempo of the latest selected Standard MIDI

Files. Therefore, when an MP3 file is assigned to the last select

Player, Pads will synchronize to the Tempo of the last Standard

MIDI File that has been played back.

About Pads and the Player’s Play command. When you press

the PLAY button to start the Player, all Pads will stop playing.

You can jump to the Style Play > Pad/Assignable Switch

page by keeping SHIFT pressed and pressing one of the PAD

buttons.

Selection

Here you can select a Style, Sound, SongBook entry, or Song, and

activate the automatic selection of the STSs.

STS MODE

This button lets you cycle between the following functions.

On When a Style is selected, STS 1 is also automati-

cally selected. The Keyboard sounds and effects

will change, along with the Style sounds and

effects.

Flashing Variation/STS Link function activated. This func-

tion makes each Variation recall the correspond-

ing STS when selected. For example, select

Variation 2, and STS 2 will be automatically

recalled; select Variation 3, and STS 3 will be

automatically recalled.

CHORD SEQUENCER (PLAY/STOP AND RECORD)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg PA600QT Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info