Bedienungsanleitung Korg PA600QT (Seite 16 von 408) (Englisch)

668718

Zoom out

Zoom in

Vorherige Seite

1/408

Nächste Seite

Overview

Front Panel

Off When you select a Style, the Style sounds and

effects will change. The Keyboard sounds and

effects will not change.

STYLE

Use this button to open the Style Select window and select a

Style. This is the same as touching the name of the Style in the

display. Repeatedly press it to cycle between the Style bank

pages.

For each type of Styles there are several banks, that can be

selected by touching the side tabs. Each Style bank contains vari-

ous pages, each with up to eight Styles, that can be selected by

touching the lower tabs.

Styles of the Factory type are usually write-protected (unless you

uncheck the “Factory Style and Pad Protect” option in the Global

> Mode Preferences > Media page). Styles of the Favorite type

can be used to load new Styles from an external device, or to save

newly created or edited Styles into banks with a freely editable

name. Styles of the User type are like the Favorites, but you can-

not edit the bank name, and are better suited for temporary

materials.

By keeping this button pressed for about one second, the

“Write Current Style Settings” dialog box will appear.

SOUND

Use this button to open the Sound Select window and select a

Sound to be assigned to the selected track. This is the same as

touching a Sound name in the display. Repeatedly press it to

cycle between the Sound bank pages.

For each type of Sounds there are several Sound banks, that can

be selected by touching the side tabs. Each Sound bank contains

various pages, each with up to eight Sounds, that can be selected

by touching the lower tabs.

Sounds of the Factory type are usually write-protected (unless

you uncheck the “Factory Sound Protect” option in the Global >

Mode Preferences > Media page). Sounds of the Legacy type are

standard Factory Sounds allowing greater compatibility with

older Pa-Series instruments. Factory Sounds of the GM type

allow for compatibility with General MIDI sounds. Sounds of

the User type are locations where you can load new Sounds from

an external device, or save new or edited Sounds. The User DK

type is where you can load new Drum Kits, or save new or edited

Drum Kits.

SONGBOOK

Press this button to open the SongBook (when you are in Style

Play or Song Play mode). While the SongBook is shown on the

display, you can browse through the music database.

By keeping this button pressed for about one second, a new

SongBook Entry with the current settings is added to the data-

base. You will be able to give it a name and save.

You can jump to the SongBook > Custom List page by

keeping SHIFT pressed and pressing the SONGBOOK button.

SONG

Press this button to open the Song Select window and choose a

Songs. This is the same as touching the Song name in the display.

Style Elements

This section contains the separate elements of a Style (Intro,

Variation, etc.) .

INTRO 1-3 buttons

These buttons turn the corresponding Intro on. After pressing

one of these buttons, start the Style, and it will begin with the

selected intro. The INTRO LED will automatically go off at the

end of the intro.

At the end of the Intro, the Variation whose LED was blinking

will be selected.

Press one of the INTRO buttons twice (LED blinking) to let the

corresponding Intro play in loop, and select any other Style ele-

ment (Intro, Variation, Ending) to exit the loop (or press the

same button again).

Note: Intro 1 plays a short sequence with different chords, while

Intro 2 plays on the latest recognized chord. Intro 3 is usually a

one-bar Count In.

VARIATION 1-4 buttons

Each of these buttons selects one of the four Variations of the

current Style. The higher the Variation number, the denser the

arrangement.

When the STS MODE LED is flashing, the Variation/STS Link

function is activated: when selected, each Variation recalls the

corresponding STS.

You can jump to the Style Play > Drum/Fill page by

keeping SHIFT pressed and pressing one of the VARIATION

buttons.

AUTO FILL

This button allows to turn the Auto Fill function on or off.

On When selecting a different Variation, the Fill hav-

ing the same number of the previous Variation is

automatically selected. For example, if going from

Variation 2 to Variation 3, Fill 2 is automatically

selected.

Off When choosing a Variation, no fill is selected.

BREAK

This button triggers a break. Press it twice (LED blinking) to let

it play in loop. Press it again or select any other Style Element

(Intro, Variation, Ending) to exit from the loop.

ENDING 1-3 buttons

While the Style is running, these three buttons trigger an End-

ing, and stop the Style. Press one of them, and the Style will stop

running with an Ending.

Press them twice (LED blinking) to let them play in loop, and

select any other Style element (Intro, Variation…) to exit the

loop (or press the same button again).

Note: Ending 1 plays a short sequence with different chords, while

Ending 2 plays on the latest recognized chord. Ending 3 starts

immediately, and is just two measures long.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg PA600QT Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info