Bedienungsanleitung Korg R3 (Seite 80 von 94) (Englisch)

668721

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

Saving Data

Saving a program

Settings that will be saved

• 01. Voice – 33. Arpeggiator-B page pa-

rameters, 34. Carrier – 39. Lvl/Pan page

parameters

• [TEMPO] knob setting

• ARPEGGIATOR [ON/OFF] switch set-

ting

• OCTAVE [UP] [DOWN] button setting

• Shift function “Program name”setting

• Shift function “Knob assign” setting

Procedure

Press the [WRITE] button.

Make sure that the main display in-

dicates “Program” (the type of data

to be saved), and press the [WRITE]

button once again.

If the main display indicates “Global”

when you press the [WRITE] button ,

the global parameters are what will be

saved. Use the [PAGE] dial to select

“Program“ and press the [WRITE]

button .

Saving your edited settings

If you have edited a program, your edited settings will be lost if you turn the power off or select another program

before saving (writing). In order to preserve your edits, you must save (write) the edited program. Changes you

make to the 40. Global-A – 46. Pedal/Sw page, or SHIFT functions (described later in this manual) will also be lost if

you turn off the power before saving (writing). In order to retain the modified settings, you must save (write) them.

Never turn off the power while data is being written. Doing so may destroy the data.

Saving GLOBAL, MIDI settings

Settings that will be saved

• 40. Global-A – 46. Pedal/Sw page pa-

rameters

• Shift function “PROTECT”setting

• Shift function “CALIBRATION” setting

• Formant motion data

Procedure

Press the [WRITE] button.

The main display will indicate Pro-

gram (the type of data to be saved),

so use the [PAGE] dial to select Glo-

bal and then press the [WRITE] but-

ton once again.

Press the [WRITE] button once

again to save (write) the global data

and MIDI settings.

The main display will indicate “Com-

plete.” The Write operation is com-

pleted, and you’ll return to the Play

mode.

If you press the [WRITE] button when

one of the Edit mode 40. MIDI – 46.

Pedal/Sw pages are selected, it will be

the global data that is saved.

Saving Formant Motion data

Settings that will be saved

• Formant motion data

Procedure

Press the [WRITE] button.

The main display will indicate Pro-

gram (the type of data to be saved),

so use the [PAGE] dial to select

Formant and then press the [WRITE]

button once again.

Use the [PAGE] dial to select the des-

tination formant motion data num-

ber into which you want to save the

formant motion data.

Press the [WRITE] button once

again to save (write) the program.

The main display will indicate “Com-

plete.” The Write operation is com-

pleted, and you’ll return to Play

mode.

If you press the [WRITE] button im-

mediately after recording a formant

motion, the main display will show

formant motion data as the object to

be saved.

If the main display indicates “WrtPrtct”

when you press the [WRITE] button

again, write protect is turned on (i.e.,

you can't write programs). Press the

[EXIT] button twice to cancel the Write

operation, and turn off Write Protect

(☞p.78).

Use the [PAGE] dial to select the des-

tination program number into which

you want to save the program.

Press the [WRITE] button once

again to save (write) the program.

The main display will indicate “Com-

plete.” The Write operation is com-

pleted, and you’ll return to Play mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg R3 Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info