Bedienungsanleitung Korg R3 (Seite 81 von 94) (Englisch)

668721

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

SHIFT functions

1-1. NAME PROGRAM

Renaming a program

The R3 lets you assign a name of up to eight

characters to each program. In Play mode,

the main display will show the program

number and the program name.

Procedure

Hold down the [SHIFT] button and press

the PROGRAM SELECT [1] button.

The [1] button will blink. The main dis-

play will show the current program

name.

Use the OCTAVE [UP][DOWN] but-

tons to select a character, and use the

[PAGE] dial to change the character.

You can also use the [1] knob to enter

uppercase characters, the [2] knob to

enter lowercase characters, the [3] knob

to enter numerals, and the [4] knob

to enter symbols.

When you’ve finished editing the pro-

gram name, press the [1] button.

The program name will be changed and

you’ll return to Play mode.

If you decide to discard your changes,

press the [EXIT] button.

If you’ve edited the program name,

your changes will be lost if you turn

off the power or switch to a different

program without writing the program.

Be sure to write the program if you

want to keep the edited program name.

2-1. INIT PROGRAM

Initializing a program

Here’s how to initialize the settings of the

currently selected program.

Procedure

Hold down the [SHIFT] button and press

the PROGRAM SELECT [2] button.

The [2] button will blink. The main dis-

play will show the name of the currently

selected program.

To initialize the program, press the [2]

button.

The program will be initialized, and

you’ll return to Play mode.

If you decide not to initialize the pro-

gram, press the [EXIT] button.

show the copy-source program number

and timbre, and the copy-destination

timbre.

To execute the copy, press the [3] but-

ton.

The settings will be copied, and you'll

return to Play mode.

If you decide to cancel the copy opera-

tion, press the [EXIT] button.

Copying and exchanging timbres/ Initializing a program

3-1. COPY TIMBRE

Copying a timbre

Here’s how to copy the timbre settings

from another program into a timbre of the

currently selected program.

This operation is available if TIMBRE SE-

LECT [TIMBRE 1] or [TIMBRE 2] is se-

lected.

Procedure

Hold down the [SHIFT] button and

press the PROGRAM SELECT [3] but-

ton.

The [3] button will blink. The main dis-

play will show the copy-source program

number and program name.

Use the [PAGE] dial to select the copy-

source program.

Press the [3] button.

The upper line of the main display

will show the copy-source timbre

(SrcTmb>#), and the lower line will

show the copy-destination timbre

selected by TIMBRE SELECT.

Use the [PAGE] dial to select the copy-

source timbre, and use the TIMBRE SE-

LECT [TIMBRE1] [ TIMBRE2] buttons

to select the copy-destination timbre.

Press the [3] button.

The main display will ask you to con-

firm the operation. The upper line will

ask “Copy OK?” and the lower line will

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg R3 Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info