Bedienungsanleitung Korg SP-280 (Seite 18 von 120) (Deutsch, Englisch, Französisch)

668710

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Selecting a temperament

You can select from nine temperaments, including the

equal temperament, pure temperaments (major and mi-

nor), classical temperaments (Kirnberger and Werckmeis-

ter) as well as temperaments used with Middle Eastern

and Indian folk music.

Display

Temperament

00 Equaltemperament(defaultseing):

Spacing all semitones at equal pitch intervals,

this temperament is the most widely used.

01 Puretemperament[major]:Major chords in the

selected key are perfectly tuned.

02 Puretemperament[minor]:Minor chords in

the selected key are perfectly tuned.

03 Arabic:This scale includes the quarter-tone in-

tervals used in Arabic music.

04 Pythagorean:This ancient Greek scale is espe-

cially eective for playing melodies. It consists

of perfect hs; however, other intervals – the

major third in particular – is out of tune.

05 Werckmeister:The Werckmeister III scale was

created in the later Baroque period to allow

relatively free transposition.

06 Kirnberger:The Kirnberger III scale is used

mainly for tuning harpsichords.

07 Slendroscale:This is an Indonesian gamelan

scale with ve notes per octave.

08 Pelogscale:This is an Indonesian gamelan

scale with seven notes per octave.

1. EntertheFunctionmode,andthenpressthePIANO2

buon.

The LED for the PIANO2 sound buon lights up, and

the temperament seing (00) appears in the display.

2. SelecttheseingwiththeUPorDOWNbuonbe-

sidethedisplay.

Aboutstretchedtuning

In order to produce the most natural resonance, PIANO1

and PIANO2 sounds use a “stretched tuning” that makes

the notes of the lower range slightly aer than equal tem-

perament, and the upper range slightly sharper. This is

how an acoustic piano is normally tuned by professional

tuners.

Partner mode settings

1. Enter the Function mode, and then press the

E.PIANO1buon.

The LED for the E.PIANO1 sound buon lights up, and

the on/o seing appears in the display.

2. EachpressoftheUPorDOWNbuonbesidethedis-

playturnsthemodeon(on)oro(oFF).

When the Partner mode is turned on, the PIANO1 sound

is used for both the left and right sides of the keyboard,

and the PIANO1 LED lights up.

The right side of the keyboard, from E4 to C8, produces

sounds in a range two octaves lower (E2–C6). The le side

of the keyboard, from A0 to E

4, produces sounds in a

range two octaves higher (A2–E

6).

The division for the le and right sides of the keyboard

as well as the range (pitches) cannot be changed.

In the Partner mode, the transposition settings are

ignored. In addition, keyboard information (Note On

and Note O) is not sent with MIDI.

Selectingthesoundfortheleside

Exit the Function mode, and then press the sound but-

ton for the sound to be used with the left side of the

keyboard. The right side of the keyboard remains set to

the PIANO1 sound.

Selectingsoundsfortheleandrightsides

Exit the Function mode, and then simultaneously press

the two sound buons for the sounds to be used. The

LEDs for the two pressed sound buons light up.

Sound for left side of keyboard

Sound for right side of keyboard

The lemost or uppermost selected sound buon is for

the le side of the keyboard, and the other (rightmost

or lowermost) one is for the right side of the keyboard.

For example, if E.PIANO1 and ORGAN1 are selected,

E.PIANO1 is for the le side of the keyboard and OR-

GAN1 for the right side of the keyboard.

In order to use sounds in different banks, first select

the banks in the Single mode for the sound buons to

be pressed.

If the Partner mode is turned off and the Function

mode is exited with the le and right sides of the key-

board set to dierent sounds, the Layer mode will be

entered.

In the Partner mode, the tone performed will change

to Piano 1 when entering the performance of a piano

song. However, the tone of the keyboard on the right

that was selected in the Partner mode will be emied

when the keyboard on the right (E4–C8) is played.

Usingthesamesound(otherthanPIANO1)forboththe

leandrightsides

Exit the Function mode, and then simultaneously press

two sound buttons, making sure that the rightmost

one is for the sound to be used. Then, press the right-

most selected sound button again. For example, after

pressing the PIANO2 and ORGAN1 buons, press the

ORGAN1 buon again to use the ORGAN1 sound with

both the le and right sides of the keyboard.

Changingthevolumefortheleandrightsides

f the sounds for the left and right sides of the key-

board have been changed, the volume can be specied

for each sound. refer to “Specifying the volume balance

for layers” on page 19.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg SP-280 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info