Bedienungsanleitung Korg SP-280 (Seite 20 von 120) (Deutsch, Englisch, Französisch)

668710

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

What is MIDI?

MIDI, is the abbreviation of Musical Instrument Digital

Interface. It is an international standard that was created

to connect and transfer data between electronic musical

instruments, computers and other devices.

What can you do with MIDI?

Thanks to MIDI, you can use the SP-280 to control other

instruments, use other instruments to control the SP-280,

and use a sequencer to create complex musical pieces.

When you use the SP-280 keyboard or pedal, or select a

sound, the notes, pedal activation and change in sound are

transmitted to another instrument, or are recorded by a

sequencer.

Connections

Commercially available MIDI cables are used to transfer

MIDI data. Connect these cables from the MIDI connectors

of the SP-280 to the MIDI connectors of the external MIDI

device that you want to exchange data with. There are two

types of MIDI connector.

MIDIINconnector

This connector receives MIDI messages.

The MIDI IN connector lets you play the SP-280’s sounds

from an external MIDI device (e.g., MIDI keyboard or se-

quencer). Use a MIDI cable to connect the SP-280’s MIDI IN

connector to your external MIDI device’s MIDI OUT con-

nector.

MIDIOUTconnector

This connector transmits MIDI messages.

The MIDI OUT connector lets you control an external

MIDI device using the MIDI messages transmitted from

the SP-280. Use a MIDI cable to connect the SP-280’s MIDI

OUT connector to your external MIDI device’s MIDI IN

connector.

MIDI function mode

When the SP-280 is turned on, the MIDI parameters are set

to transmission channel 1, all reception channels (1–16),

Local On and Omni O.

These settings can be changed from the MIDI function

mode.

Setting procedure for parameters in the MIDI

function mode

1. HolddowntheFUNCTIONbuon.

The FUNCTION LED blinks.

2. Pressthesoundbuoncorrespondingtothedesired

parameter.

The current seing appears in the display.

3. Specifythedesiredseing.

4. After specifying the desired settings, press the

FUNCTIONbuontoreturntothemodeforplaying.

The FUNCTION LED turns o.

1,4

When the SP-280 is turned o, all parameters return to

their default seings.

Changing the MIDI channels

Data can be transmied and received on MIDI channels 1

through 16 (C01–C16).

When the SP-280 is turned on, transmission channel 1 (C01)

is automatically selected.

• AerenteringtheMIDIfunctionmode,theLEDfor

thePIANO1soundbuonlightsup.

When the MIDI function mode is entered, the MIDI

channel seing normally appears.

To specify the MIDI channel setting after changing

other settings in the MIDI function mode, press the

PIANO1 buon.

In the Layer or Partner modes, selecting the transmission

channel specifies the channel for layer 1 or the left side

of the keyboard. The transmission channel for layer 2 or

the right side of the keyboard will automatically be set to

the following channel. For example, if MIDI channel 7 is

selected for the sound of layer 1 or the le side of the key-

board, MIDI channel 8 will automatically be specied for

the sound of layer 2 or the right side of the keyboard. If

MIDI channel 16 is selected for the sound of layer 1 or the

le side of the keyboard, channel 1 will be specied for the

sound of layer 2 or the right side of the keyboard.

Local On/Off

With the Local On seing, playing the SP-280’s keyboard

produces the sounds of the performance as well as trans-

mits MIDI data. With the Local Off setting, playing the

SP-280’s keyboard does not produce the sounds of the

performance; MIDI data is only transmied. Normally this

parameter is set to Local On (default seing: on).

The Local Off setting should be selected when using the

SP-280 as a master keyboard, for example, to play sounds

from a connected MIDI device (a keyboard, sound module,

etc.). The SP-280 will not produce sound, but the perfor-

mance will be played by the connected MIDI device.

Select the Local Off setting (oFF) when using the SP-280

as a sound module, for example, when the SP-280 is con-

nected to a sequencer with its Echo Back seing (function

that sends back data that the sequencer received) selected

in order to prevent echoing of returned data.

• EntertheMIDIfunctionmode,andthenpressthe

PIANO2buon.

The LED for the PIANO2 sound buon lights up, and

the Local On/O seing (on) appears in the display.

MIDI

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg SP-280 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info