Bedienungsanleitung Korg VOX Continental (Seite 17 von 26) (Englisch)

707384

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

EnglishFrançaisDeutschEspañol

En-17

Detailed Functions 8. Scene select

LFO

(6) PITCH LFO

Adjusts how much the LFO makes the pitch vibrate.

(7) LFO FREQ

This sets the LFO frequency.

Note: When the value is 0 dB, the two LEDs in the center will

dimly light.

Assignable

(8) ASSIGN1

The assigned effect will differ for each sound.

(9) ASSIGN2

The assigned effect will differ for each sound.

Note: Some values are set as switches (when the top four LEDs

are lit, the value is “on”; and when the bottom four LEDs are

lit, the value is “off”) or as sliders.

EQ frequency band and gain

The nine-band graphic EQ is placed in the latter part of the

EFFECTS series, and applies to the VALVE DRIVE and stereo

out.

All of the equalizer bands are peaking equalizers.

Turn the EQ button on.

63 Hz gain [dB] [–12.0…+12.0]

125 Hz gain [dB] [–12.0…+12.0]

250 Hz gain [dB] [–12.0…+12.0]

500 Hz gain [dB] [–12.0…+12.0]

1 KHz gain [dB] [–12.0…+12.0]

2 KHz gain [dB] [–12.0…+12.0]

4 KHz gain [dB] [–12.0…+12.0]

8 KHz gain [dB] [–12.0…+12.0]

16 KHz gain [dB] [–12.0…+12.0]

This sets the gain for each band.

Refer to page 19 for how to use the EQ.

Note: When the value is 0 dB, the two LEDs in the center will

dimly light.

Note: Although the EQ on/off and the settings made here will

not be saved in a scene, they will be saved when the power is

turned off, and will be recalled when the instrument is turned

on.

8. Scene select

Up to 16 sounds that are set on the VOX Continental can be

saved, and you can recall those settings instantly. These are

called “scenes”.

Settings that are saved:

Part select button, each sound part, touch sensors, and EFFECT

control (except for the EQ), octave and transpose settings

Settings that are not saved:

EQ, VOLUME knob, VALVE DRIVE knob and button,

DYNAMICS knob and button, CONTROL button, bend lever

1: BANK ,  buttons, LEDs

There are four scene banks, from A to D.

Press the BANK ,  buttons to select a bank.

2: SCENE 1, 2, 3, 4 buttons

Press the BANK ,  buttons to recall scenes 1–4 from the

selected bank.

The sound will switch to the settings that are saved for that

scene.

Note: If you change one of the settings listed above in “Settings

that are saved”, the currently selected SCENE button will

blink. Press the blinking SCENE button to undo the changes

and revert to the saved state.

3: WRITE button

This saves the current sound settings to a scene.

Refer to “Saving a Scene” (see page 11) for how to register a

scene.

Note: When you turn the power on, the scene that you had

selected before turning the power off will be recalled.

4: EXIT button

Use this button to cancel write operations, when making

system settings such as master tuning or MIDI channels, or to

escape the current operation. (See page 20)

125 250 500 1K 2K 4K 8K 16K Hz

-12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg VOX Continental Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg VOX Continental

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info