Bedienungsanleitung Korg X50 (Seite 117 von 132) (Englisch)

668615

117

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

111

Quick StartIntroductionSetupProgram

Combination

MultiEffectGlobalArpeggiatorDrum Kit

Other functions

Restoring the factory set-

tings (Loading the preloaded

data)

If desired, you can restore the X50’s programs,

combinations, multi sets and Global mode settings

to their factory-set state. You can do this by reload-

ing the preloaded data.

This operation will rewrite any data that had

been previously written to the internal

memory. If you don’t want to lose this data,

you should save it using the included “X50

Editor/Plug-In Editor”; or save the data using

a commercially available data ﬁler.

1. Press the [GLOBAL] button to enter Global

mode. (The button will light.)

2. Press the [EXIT] button.

You will be in the GLOBAL 0: System page.

3. Press the [UTILITY] button to access the Utility

menu.

4. Use the ClickPoint [†] to select “Load Preload

Data,” and press the center.

A dialog box will appear.

5. Choose “Kind,” and use the [VALUE] dial or

the [INC][DEC] buttons to select the data that

you want to load.

Choose All if you want to restore all settings to

the factory-set state. If you execute this with the

“All” setting, all programs, combinations, multi

sets, drum kits, arpeggio patterns, and global

settings will be loaded.

6. Press the [MENU/OK] button.

A dialog box will ask you to conﬁrm the

operation.

7. Press the [MENU/OK] button once again.

All preloaded data will be loaded.

If the “Memory Protected” dialog box

appears, un-check the memory protect

setting, and perform the load operation once

again (☞p.88).

Loading individual banks or data

items

The X50 allows you to load individual banks, pro-

grams, or combinations. Multi set, drum kits

andarpeggio patterns can also be loaded individu-

ally or as a group.

This is convenient when you want to restore just

one item from the factory preload data, or when

you want to rearrange combinations in a speciﬁc

order for live performance.

When rearranging programs, you need to be

aware that if you write them to another bank

or number, any combination that had used the

program formerly occupying the writing

destination will sound differently.

For example if you want to load combination

B015 into C127, proceed as follows.

1. Access the dialog box as described in steps 1–4,

above.

2. Choose “Kind,” and use the [VALUE] dial or

the [INC][DEC] buttons etc. to select

Combination.

3. Use the ClickPoint [†] to move down, and use

the [VALUE] dial or [INC][DEC] buttons to

select Single.

4. In the same way, select combination B015 as the

copy-source.

5. In the same way, select combination C127 as the

load-destination (“To”).

6. Press the [MENU/OK] button.

A dialog box will ask you to conﬁrm the

operation.

7. Press the [MENU/OK] button once again.

The data will be loaded, and the preloaded

combination B015 will be copied into C127.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg X50 Seite 117

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info