Bedienungsanleitung Korg X50 (Seite 119 von 132) (Englisch)

668615

119

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Setting the functions of [SW1] and [SW2]

113

Quick StartIntroductionSetupProgram

Combination

MultiEffectGlobalArpeggiatorDrum Kit

Other functions

Setting the functions of

[SW1] and [SW2]

[SW1] and [SW2] are the two switches below the

[PITCH] wheel and [MOD] wheel. These on/off

switches can perform a number of different func-

tions, such as modulating sounds or effects, or

locking the modulation values of the [PITCH]

wheel.

Also, each one may work either as a toggle, or as a

momentary switch. In Toggle mode, each press

alternates between on and off; in Momentary

mode, the switch only changes for as long as you

hold it down.

Use “SW 1/2 Assign” in the following pages to

make these settings.

• Each Program, Combination, and Multi set

stores its own settings for what the switches

will do, and whether each switch is on or off

(based on their current states when the data is

saved).

• When using SW1/2 for AMS or Dmod, the

default settings are SW1 Mod.(CC#80) and SW2

Mod.(CC#81).

• For an example, see “Using the Dmod function

and [SW1] to vary the feedback level” (☞p.85).

For a complete list of the possible assignments,

see “SW1/2 Assign” (☞PG p.161).

Note: If you wish to keep these settings after the

power is turned off, you must save the Program,

Combination, or Multi set.

Assigning functions to REAL-

TIME CONTROLS B-mode

knobs [1]–[4]

Here’s how you can assign functions to REAL-

TIME CONTROLS B-mode knobs [1]–[4].

The functions of these knobs in B-mode can be

separately assigned for each program, combina-

tion, and multi set.

You will make these settings in “Knob B Assign”

in the following pages.

• The default assignments for knobs 1–4 are

Knob Mod.1 (CC#17), Knob Mod.2 (CC#19),

Knob Mod.3 (CC#20), and Knob Mod.4

(CC#21), respectively. For a complete list of the

possible assignments, see “Knobs 1…4 B

Assign” (☞PG p.162).

Here’s an example of how to set up knob [1] to

control a Program’s ﬁlter and amp EG attack time:

1. Press the [PROG] button to enter Program

mode.

2. Access PROG 7: Ed–Arp/Ctrls, Controls.

Press the [MENU/OK] button, use the

ClickPoint to select “Arp/Controls,” and then

press the center.

3. Choose Knob 1-B “Knob B Assign,” and use the

[VALUE] dial etc. to select F/A Attack (CC#73).

4. Press the REALTIME CONTROLS [SELECT]

button to select B-mode, and turn knob [1] to

control the EG attack for the ﬁlter and amp.

Note: If you wish to keep these settings after the

power is turned off, you must save the Program,

Combination, or Multi set.

Mode Page

Program PROG 7: Ed–Arp/Ctrls, Controls

Combination COMBI 7: Ed–Arp/Ctrls, Controls

Multi MULTI 7: Arp/Ctrls, Controls

Mode Page

Program PROG 7: Ed–Arp/Ctrls, Controls

Combination COMBI 7: Ed–Arp/Ctrls, Controls

Multi MULTI 7: Arp/Ctrls, Controls

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg X50 Seite 119

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info