16
Before First Use
• Remove all packaging material and check whether the
appliance is complete.
• Fully unwind the power cord (8) and make sure that the
power cord (8) underneath the appliance is clamped into
the cable guide (9).
• Place the appliance on an even and heat resistant surface.
Do not place it on top of a metal surface.
• Connect the appliance to a properly installed wall socket
and boil 4-5 kettles of water using fresh water with each
boiling cycle. Do not use this water but pour it away.
Warning: Plastic bags are a danger to toddlers and
babies, therefore keep them away to avoid suffocation.
Operation
Your appliance is fitted (inside the spout) with a removable scale
filter that prevents scale particles ending up in your beverage.
1. Open the lid (2) and hold the kettle (4) in an upright position
to fill it with water. Make sure to fill in the MIN amount of
water (0.5L) to avoid overheating.
Info: The kettle can also be filled with water when the lid (2) is
closed by filling it through the spout (1).
2. Close the lid (2) and make sure it is properly closed.
3. Place the kettle (4) onto the base (7) and make sure it
properly fits onto the contact unit.
4. Connect it to the mains and switch on the water kettle by
pressing the On/Off switch (5). The indicator light (6) lights
up.
5. As soon as the water boils, the appliance switches off
automatically provided that you have thoroughly closed the
lid (2). Otherwise boiling water could spill. The indicator light
goes off as well.
6. Lift the kettle (4) off the base (7). The water is now ready for
use.
