Bedienungsanleitung Kress 1500 KS (Seite 8 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

508050

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

English 1500 KS

Application

The circular saw is an all-purpose saw for cutting soft

and hard woods, chipboard, plywood, plastics,

resopal-coated materials.

Before putting the machine into operation, read

through these operating instructions completely and

observe the safety instructions contained therein as

well as those in the enclosed booklet on general

safety instructions for electro-tools.

If the mains cable is damaged while working, pull

the mains plug immediately.

Never work with a damaged mains cable.

For safety reasons, work only with the auxiliary

handle

mounted.

Do not carry the machine by the cable.

The mains receptacles in the working area must be

protected by a residual current circuit breaker (RC).

For the attachment of identification markings on the

machine, do not drill into the housing. The protec-

tive insulation would be shorted. Use stickers.

Wear protective goggles, ear protectors and face

mask.

Wear protective gloves and sturdy shoes.

For long hair, wear hair protection. Work only with

close-fitting clothes.

The machine must be operated only with the asso-

ciated protective devices.

Always use the riving knife

The swinging guard

must be able to move

freely. It must not become jammed in the opened

state.

For stationary use, the machine may be operated

only on a sawing table with restarting protection.

Always direct the cable to the rear away from the

machine.

Connect machines that are used in the open via a

residual current circuit breaker with a triggering

current of 30 mA maximum. Use only extension

cables that are intended for outdoor use and are

protected against splash water.

Cracked or distorted blades may not be used. Work

only with good sharp blades.

Never use high-alloy HSS blades with this circular

saw.

Saw blades which are not in accordance with the

specifications stated in these operating instructions

may not be used.

Only use blades whose hub thickness is not

greater than and whose tooth offset width is not

less than the width of the gap rudder.

Insert the mains plug only when the machine is

switched off. The device must be always switched

on and off with the trigger switch and never by pull-

ing out or inserting the plug at the socket or by pull-

ing out/inserting the mains cable on the machine.

When working, always guide the machine away

from the body.

The cutting path must be free of obstacles both

above and blow. Do not saw into nails, screws, etc.

The saw blade should not protrude below the work-

piece more than

3 mm

Keep hands clear of the rotating saw blade. Do not

come into contact with the rotating saw blade on

the underside of the workpiece.

Do not stick fingers into the sawdust ejector

Do not work with materials containing asbestos.

Do not tilt the saw blade.

If the saw blade jams, switch off the machine imme-

diately.

After switching off, do not brake the saw blade to a

stop by applying side pressure.

Latch for mains cable module

Safety lock off button

On-off switch with lock off safety position

Pin for spindle lock

Ventilation slots

Wing-nut (to set cutting depth)

Helper handle

Clamp lever (for setting the cutting angle)

Cutting angle scale

Star grip bolt for parallel stop

Parallel guide

Swinging protective guard

Base

Eye shield

Riving knife

Upper guard

Riving knife screw

Sawdust ejector (suction neck)

Cutting depth scale

Accessories illustrated or described are not always

included as standard delivery items.

Safety Instructions and

Accident Prevention

2 Illustration

1500 KS.book Seite 8 Montag, 15. April 2002 11:11 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kress 1500 KS Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info