Bedienungsanleitung Kress cds 6425 exl (Seite 6 von 30) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

389720

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

English

1On/Off switch

2Electronic adjusting wheel (CDS 6425 EXL)

3Grinding-disc lock

4Grinding disc

5Lock for mains cable (CDS 6425 EXL)

6Mains cable with patent quick-action lock

(CDS 6425 EXL)

7Connection for vacuum cleaner (Ø 35 mm)

SpecificationsCDS 6425CDS 6425 EXL

_____________________________________________

Power consumption Watt 280280

Power output Watt 170 170

Idling speed rpm 13000 8500...13000

Vibrating radius mm 1.5 1.5

Grinding disc

dimensions (diagonal) mm 105120

Weight approx. kg 1.1 1.1

Use:

The triangular grinder can be used universally to grind

wood, lacquer, metals and plastics.

The triangular form of the grinding disc also allows

grinding in hard-to-reach places and corners.

Double insulation.

Our equipment is designed in accordance with European

regulations (EN standards) for the utmost safety of the

user. Machines with double insulation always carry the

international symbol. The machines do not require

earthing. A two-core cable is sufficient.

The machines are interference-suppressed in accordance

with EN 55014.

Initial operation.

Before the first operation check that the mains voltage

corresponds to that given on the machine nameplate.

Safety instructions and prevention of accidents.

Before operating the machine, please read through the

operating instructions completely, follow the Safety

Instructions in this manual as well as the general Safety

Instructions for PowerTools in the accompanying

booklet.

1. Always remove the plug from the socket before

manipulating the machine.

2. Replace any damaged connecting leads.

3. Protective eyewear (safety glasses) is to be worn at

all times when working with the triangular grinder!

4. Do not operate the machine with loose hair and

loose clothing!

5. Keep the machine dry when working outdoors.

6. Keep the unit out of reach of children!

7. It is essential to wear a mask when grinding for a

prolonged period without a dust extraction unit.

8. The use of ear protection is recommended during

longer grinding sessions.

9. The unit must only be used for dry grinding!

10. The machine must not be used to grind material

that contains asbestos.

11. The dust produced when processing rock con-

taining crystalline silicic acid is potentially harmful.

12. Safety regulation VBG 119 of the employer's

liability insurance association is to be observed.

13. Outside power sockets must be protected with

residual-current-operated circuit-breakers (r.c.c.b.).

14. Do not drill holes into the housing to label the

machine. The protective insulation will be bridged.

Please use self-adhesive labels.

Switch with fixing key for

continuous operation.

The machine is activated by pushing the switchgroup (8)

in the direction of the arrow. The pushbutton (9) will

automatically latch into final position. If the protruding

edge of the pushbutton (9) is pressed, the pushbutton is

triggered and the switchgroup (8) is automatically re-

turned to its initial position. The machine subsequently

comes to a stop.

Selecting the grinding disc.

The triangular grinder is equipped with a grinding disc

with a large width across the corners, for which various

self-adhesive abrasive papers with different grain sizes

are available. The quick-release lock allows you to

replace the grinding disc without additional tools and

rotate the disc in 120°intervals.

A flap attachment (optional) and a respective range of

grinding paper sizes are available for grinding slatted

doors and shutters.

Assembling and disassembling

the grinding plate.

Caution! Remove plug from

electrical socket!

Place grinding disc (4) on the unit so that the visible

markings on the surface of the grinding disc correspond

to the peripheral contours of the fixture. Press the

grinding disc into the fixture and turn in the direction of

the arrow until the lock snaps into place.

To remove the grinding disc, press in the lock (3) and

turn the grinding disc (4) in the opposite direction. This

procedure also applies to the assembly and disassembly

of the flap attachment (10).

If the Velcro lining on the original grinding disc

becomes worn or damaged during use, you may turn

the grinding plate 120°twice to obtain proper

adhesion for the Velcro paper.

The Velcro lining on the grinding disc is a wearing part

and is thus excluded from the conditions of the guarantee.

Assembling the grinding tools.

Use only original KRESS grinding tools with self-

adhesive Velcro!

Caution! Remove plug from electrical socket!

For heavy dirt accumulation clean grinding disc!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kress cds 6425 exl Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info