Bedienungsanleitung Kress KG757E (Seite 13 von 188) (Alle Sprachen)

819058

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

Assembling the grass collection bag to the lawn

mower (See Fig. B1, B2, B3)

NOTE: Depress the grass collection bag slightly to

ensure that it is completely installed.

Removing/emptying grass collection bag

(See

Fig. C1, C2)

WARNING! Always check the safety ap close

the discharge outlet before using. Never lift the

safety ap when the lawn mower is being used without

tted grass collection bag.

Installing the rear side-discharge chute（Sold

Separately）(See Fig. D)

Removing grass collection bag, then install rear side-

discharge chute in.

Installing the mulching insert (See Fig. E)

Removing grass collection bag or rear side-discharge

chute, then install mulching insert in.

Checking the battery charge condition (See Fig.

F1)

NOTE: Fig. F1 only applies for the battery pack with

battery indicator light.

The battery level can be determined by pressing the power

indicator button beside the battery lights. Press the button

before and after each use to check the battery

Remarks LED-light Battery condition

Five green

lights are

illuminated.70% ≤ Power level≤100%

Four green

lights are

illuminated. 50% ≤ Power level < 70%

Three green

lights are

illuminated. 35% ≤ Power level < 50%

Two green

lights are

illuminated. 20% ≤ Power level < 35%

One green

light are

illuminated. 10% ≤ Power level < 20%

No light is

illuminated. Power level < 10%

Charging the battery pack (See Fig. F2)

- Your battery pack is partly charged and needs to be fully

charged before rst use.

- More details can be found in charger’s manual.

Installing & removing the battery pack (See Fig.

F3, F4)

Insert the safety key before installing battery pack(s).

NOTE: Depress the battery release button to release

battery pack(s) from your tool. After recharging, insert

the battery pack into tool’s battery port until you hear

a “click”. A simple push and slight pressure will be

sufcient.

Checking the power indicator light (See Fig. F5)

Press the switch button for battery indicator light and the

power indicator light will be on .

OPERATION

Starting and Stopping (See Fig. G1, G2)

Press the Safety lock-out button, then push Operating

bail to start. Release the operating bail to stop.

For starting, press both the Safety lock-out button and

the Operating bail at the same time.

Operating the self-propel system (See Fig. H)

Press the Safety lock-out button, then push the Self-

propel speed-control lever to operate.

NOTE: To activate self-propel, press both the Safety

lock-out button and the Self-propel speed-control lever at

the same time.

MULCHING MOWING TIPS

While mulching, your new mower is designed to cut the

grass clippings into small pieces and distribute them

back into the lawn. Under normal conditions, the mulched

grass will biodegrade quickly and deliver nutrients to the

lawn. Please review the following recommendations for

optimum mulching performance.

1) Avoid mowing when the grass is wet from rain or dew.

Wet grass may form clumps which interfere with the

mulching action and reduce the runtime. The best

time to mow the grass is in the late afternoon when

the grass is dry and the newly cut area will not be

exposed to direct sunlight.

2) For the best mulching performance, set the cutting

height to remove about one third of the grass blade

length, ideally no more than 40mm at one time. If the

lawn is overgrown, it may be necessary to increase

the cutting height to reduce the pushing effort and

prevent overloading the motor. For extremely heavy

mulching, it is advisable to rst cut at a high cut

height setting, and then re-cut to the nal cut height.

Otherwise, make narrower cuts and mow slowly.

3) For the best performance, keep the mower housing

free of built-up grass. From time to time turn off

mower and wait for the blades to come to a complete

stop. Then unplug the safety key, remove the batteries

and turn mower on its side. Using an object such as a

stick, wipe out any accumulation of grass around the

blade area. Be careful of the sharp edges of the blade.

Ensure to clean the blade area often when cutting

wet or new grass and every time after the machine is

used.

4) Certain types of grass or grass conditions may

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kress KG757E Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info