Bedienungsanleitung Krups f 897 (Seite 17 von 50) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

361267

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

accessory specially designed forthis purpose.

Fit it onto the steam nozzle (19).

Please note ! This accessory must only be

used for this purpose.

• Pour about 100 ml of skimmed milk into a

small high-sided container (maximum

capacity 0.5 L) which will fit beneath the

steam nozzle.

The container as well as the milk should be

chilled (do not rinse the container in hot water

before use).

• First prepare an espresso, but only fill the

cup halfway.

• Turn the steam/hot water button to

and

press the

key (20).

The red operating control light and the green

steam control light will both flash. As soon as

the red operating control light stops flashing,

the appliance has reached the optimum

temperature for the production of steam. If

you do not actuate the steam/hot water

button in the next 2 minutes, the appliance

will return to its normal operating mode.

• Dip the steam nozzle into the container

holding the milk.

• During the preparation, keep the end of the

steam nozzle in the milk (21).

• Turn the steam/hot water button to the

position. The nozzle must not touch the

bottom of the container. Once the operation

is finished, return the button to the position

• Remove the container and swing the steam

nozzle towards the drip tray

• Repeat the steam making operation for a

moment in order to eliminate the residue of

the milk which might remain in the end of

the nozzle. Remove the cappuccino

accessory to clean it. Wipe down the steam

nozzle with a damp cloth immediately after

the frothing.

Preheating cups

For the first espresso of the day, you should

pre-heat the cups with hot water. For further

use, the cups can be pre-heated on the

warming plate.

To pre-heat cups with water, proceed as if

making an espresso but without putting a

coffee capsule in the capsule holder.

Heating liquids

• Turn the steam/hot water button

to the

position and press the key

The red operating control light and the green

steam control light will both flash. As soon as

the red operating control light stops flashing,

the appliance has reached the optimum

temperature for the production of steam. If

you do not activate the steam/hot water

button within 2 minutes, the appliance will

return to its normal operating mode.

• Immerse the steam nozzle and dip it into the

container holding the liquid. During this

operation, keep the end of the steam nozzle

in the liquid.

• Turn the steam/hot water button to the

position

(22).

Make sure that the nozzle does not touch the

bottom of the container.

• Once the operation is completed, return the

button to the

position.

• Remove the container and swing the steam

nozzle towards the drip tray.

Important:

If you want to make espresso immediately

after making a cappuccino or heating liquid,

the appliacne must be allowed to cool down

to the coffee temperature. To do this :

. Either place the capsule holder in position

without a capsule, put a container below the

coffee outlet and run about 2 cups of water

through via the coffee outler

. or wait until the red operating control light

stops flashing.

Cleaning

•Empty the water tank after each use.

• Never wash your espresso machine

accessories in the dishwasher.

ART. 897.PM6.5 18/02/04, 10:1017

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Krups f 897 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info