Bedienungsanleitung Krups FNC3 (Seite 18 von 37) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

461401

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Using the various functions of

your espresso machine

1. ESPRESSO FUNCTION

. WITH GROUND COFFEE

For best results, we recommend that you first

pre-heat the accessories (filter holder, filter

and cups) without putting in ground

coffee. To do this :

• Fill the water tank (1) (2) (3) and start the

appliance (5).

• Put the filter holder in place (7) (8), and

place the espresso cups underneath.

As soon as the appliance reaches the correct

temperature the orange indicator light will go

out.

• Turn selector to the setting (10).

• When the cups are full of hot water, reset

the selector to the

O setting.

Once the appliance is hot, the espresso cups

can then be pre-heated on the cup warming

plate.

. Preparing an espresso :

• Fill the water tank (1) (2) (3) and start the

appliance (5).

• Put the filter for one or two cups into the

filter holder (6) .

• Put one or two measures of ground coffee

into the filter with the measuring spoon and

tamp down using the measuring spoon (12)

(13).

• Remove any ground coffee which is lying

around the filter (14).

• Replace the filter holder (15).

• Place one or two espresso cups beneath the

filter holder.

As soon as the appliance reaches the correct

temperature the orange indicator light will go

out.

• Then turn the selector to the setting

(16).

• When the cups are full, reset the selector to

the O setting.

• Remove the filter holder and the filter from

the machine, and take out the coffee

grounds (17).

The filter can be refilled to make more

espressos.

. WITH THE SPECIAL «ESE» FILTER HOLDER

(MODELS FNC2/FNC3)

The E.S.E. system was designed for making

Italian-style “espresso ristreto” (squeezed).

The amount of coffee is 35 ml and the water

should take 20 seconds to run through.

«ESE», which stands for «Easy Serving

Espresso» , is a selected measure of coffee,

ground and pressed between two filter papers

making it ready for use. This system thus

makes it easy for you to prepare your espresso

because you avoid the measurement and

tamping down operations and it also makes it

easier for you to clean the appliance.

We do not intend, or recommend, that

the ESE servings are used for making a

long coffee.

We recommend that you take care, when

handling and storing the ESE servings, that

they do not become deformed.

For best results, we recommend that you pre-

heat the accessories (filter holder, filter and

cups) without any coffee. To do this:

• Fill the water tank (1) (2) (3) and start the

appliance (5).

• Put the empty ESE filter in place (7) (8) (9)

and position the espresso cup underneath.

Once the appliance reaches the correct

temperature, the orange temperature control

light will go out.

• Then turn the selector to the

setting

(10).

• When the cup is full of hot water, reset the

selector to the O setting.

Once the machine has heated up, the

espresso cups can be pre-heated on the cup

warming plate (on top of the machine).

. Preparing an espresso:

• Place the ESE serving in the ESE filter holder

fitted with its own filter (21).

FNC1/2/3.PM6.5 19/01/04, 16:1718

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Krups FNC3 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info