Bedienungsanleitung Krups FNC3 (Seite 20 von 37) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

461401

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

• Fill the water tank (1) (2) (3) and start the

appliance (5).

• Move the steam nozzle to the exterior of the

appliance.

• Turn the selector to the setting (19).

Once the appliance reaches the correct

temperature, the orange temperature control

light will go out.

• Immerse the steam nozzle in the container

holding the liquid to be heated.

• Then turn the selector to the setting (20)

until the liquid is hot enough, then reset the

selector to the O setting and remove the

container.

• For liquids other than water, turn the

selector to the setting

(19) for the

following cleaning operation in order to

prevent any blockage of the opening of the

steam nozzle :

• place an empty container below the steam

nozzle.

• select the setting again (20) to remove

the residue of the liquid.

• turn the selector to the setting O.

• Clean the steam nozzle with a damp cloth.

• For more thorough cleaning of the nozzle,

please refer to the paragraph on mainte-

nance.

Maintenance

- Never wash your espresso machine

accessories in the dishwasher.

After use, the water tank must be emptied.

. Drip plate

This must be emptied after using the

appliance after taking off the grid (22) (23). If

several espressos are being prepared one after

the other, the drip plate should be emptied

from time to time (about once every 7 - 8

espressos). The presence of water is normal

and does not signify a leak. If necessary, clean

the drip plate and its grid with water and a

little non-abrasive washing-up liquid, rinse

and dry. When reassembling the machine,

ensure that the plastic lining is in the right

place (24).

. The brewing head, the filter and the

filter holder

These must be cleaned after each use. All you

need to do is wipe a damp cloth over the

brewing head of your appliance and to wash

the other accessories in water and a little non-

abrasive washing-up liquid, rinse and dry.

If the brewing head is heavily clogged up,

unscrew the grid using a coin, clean it and

refit it, pressing down firmly (25).

When your espresso is not being used, do not

leave the filter holder on the appliance to

prevent wear on the gasket.

. The cup warming plate: remove this to

clean it with water and a little non-abrasive

washing-up liquid, rinse and dry (26).

. Steam nozzle: wipe with a damp cloth

after each use

. The cappuccino accessory

For more thorough cleaning the cappuccino

accessory can be dismantled.

• Remove parts A and C from the metal tube

B (27).

• Clean all three parts with hot water. If need

be, unclog the opening of part A using a

fine needle.

• Be careful with the little plastic nozzle (part

A) when you replace the cappuccino accessory.

Descaling

• Descaling of your espresso should be done

fairly frequently with citric or tartaric acid.

• The guarantee does not include

espresso machines which do not

function, or do not function properly,

because descaling has not been carried

out.

However, we would advise you to use the

Krups descaling accessory, reference 054,

which is available from Krups after-sales ser-

vice centres. This accessory includes, apart

from two descaling doses, a testing strip for

FNC1/2/3.PM6.5 19/01/04, 16:1720

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Krups FNC3 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info