Bedienungsanleitung Krups HP60A - i Prep and Cook XL (Seite 108 von 120) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

712621

108

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

101

MODE MANUEL:

1. Press directly on the button

for the setting you want to

adjust, i.e. the speed selec-

tor (B1) or the cooking tem-

perature selector (B2) or

the time selector (B3), the

chosen parameter ashes

on the screen (C5-C6-C7).

The program is then in pause mode

and you have the possibility of

restarting by pressing “start” again. If

you have chosen the wrong program

and if you want to cancel it, press and

hold the “stop” button for 2 seconds.

4. When the program has ended,

the appliance sounds 3 beeps.

5. Press the locks (D2) and then

remove the bowl assembly (D)

(See Fig.12).

YOUR APPLIANCE IS EQUIPPED

WITH A FLATBASED CAP

The at-based cap lets you free-up

space in the bowl for cooking or

browning without being hindered by

the guide (See Fig.15).

COOKING WITHOUT THE LID

You can brown foods in your bowl

without the lid while stirring and

monitoring the cooking. (See Fig.16).

For this method of cooking you must

select a temperature ranging from

135°C to 150°C. Set the operating

time (up to 20 min).

The COOKING WITHOUT A LID

mode is not suitable for making jams

and milk-based preparations (risk of

overowing).

2. Then adjust the setting(s)

using the +/- selector (B6).

For safety reasons, it is not

possible to set a tempera-

ture without setting a cook-

ing time.

3. When you have nished

entering all your settings,

press the “start” button

(B5). When your appliance

is using cooking mode, the

red indicator light, lights up

to inform you that cooking

has started. When the pro-

gram has started, you have

the possibility of stopping

the appliance at any time

by pressing the “stop” but-

ton (B5).

CLEANING YOUR APPLIANCE

 The appliance should not be immersed.

Never put the motor unit (A) under running

water. Once you have nished using it,

disconnect the appliance.

 Clean the bowl immediately after use to

avoid staining.

 Press the locks (D2) then lift the bowl

assembly (D).

 Place the bowl on a at surface.

 Unlock the lid by rotating one quarter of a

turn clockwise. Carefully remove the lid.

 Take care with the knives of the ultrablade

knife (F1) and the kneading / grinding

knife (F4) when you are cleaning them

and when you empty the bowl, they are

extremely sharp.

 When the parts have cooled down:

–dismantle the common spindle (D3), the

seal (D4) and the locking ring (D6) (See

Fig.13).

–clean the bowl (D), the common spindle

(D3), the seal (D4),or the XL bottom

accessory (D5) and the seal (D4), the

locking ring (D6), the accessories (F1),

(F2), (F3), (F4), (F5), the steam regulator

cap (E1), the lid (E2), the seal (E3) ,and

lid seal (E4) using a sponge and some

soapy water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Krups HP60A - i Prep and Cook XL Seite 108

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info