111232
4
Zoom out
Zoom in
Vorherige Seite
1/9
Nächste Seite
Place one or two espresso cups beneath the
filter holder.
As soon as the control lamp on the coffee
buttons glows continuously, the appliance is
ready to operate.
Your appliance is already preprogrammed for
the preparation of one or two cups of
espresso.
Pressing the coffee keys
or
(9) (10).
At the beginning, there is a pre brewing
time lasting 2 or 3 seconds.
When the programmed quantity is reached,
the espresso stops running automatically.
• Remove the filter holder and the filter from
the machine and take out the coffee
grounds (14).
The filter can be refilled to make more
espressos.
. WITH THE SPECIAL «ESE» FILTER
The E.S.E. system was designed for making
Italian-style espresso ristreto (squeezed). The
amount of coffee is 35 ml and the water
should take 20 seconds to run through.
(see Individual Programming to adjust volume)
«ESE», which stands for «Easy Serving
Espresso» , is a selected measure of coffee,
ground and pressed between two filter papers
making it ready for use. This system makes it
easy for you to prepare your espresso because
you avoid the measurement and tamping
down operations and it also makes it easier
for you to clean the appliance.
We do not intend, or recommend, that
the ESE servings are used for making a
long coffee.
We recommend that you take care, when
handling and storing the ESE servings, that
they do not become deformed.
For best results, we recommend that you pre-
heat the accessories (filter holder, filter and
cups) without any coffee. Do this as described
in the Making an Espresso using Espresso
Ground Coffee section.
. Preparing an espresso:
Fill the water tank (1) (2) (3) and start the
appliance (4).
Place the ESE serving in the ESE filter (18).
Tear excess paper from the pod at the
perforated edge. Place the ESE pod with the
RED MARKING FACE DOWN (bend the paper
corners down).
•Take care to put all the paper inside the filter
to avoid any drips.
Placing the ESE pod correctly will create a
richer, thicker crema.
Put the filter holder in place (6) (7) (8) by
pressing it firmly to the right.
As soon as the control lamp on the coffee
buttons glows continuously, the appliance is
ready to operate.
Press the coffee key
(9).
At the beginning, there is a pre-brewing
time lasting 2 or 3 seconds.
When the recommended quantity of coffee
has been reached (35ml), press the coffee
button
(9) if suitable volume was not
preprogrammed.
• Remove the filter holder from the brewing
head and throw away the used measure.
. Individual Programming:
Should you wish to alter the preprogrammed
quantity (50ml per cup, manufacturing
setting) of hot espresso filled into one or two
cups, proceed as follows:
Fill the water tank (1) (2) (3) and start the
appliance (4).
Put the filter for one or two cups into the
filter holder (5).
Put one or two measures of ground coffee
into the filter with the measuring spoon and
tamp down using the measuring spoon (11)
(12) or a ESE pod in the ESE filter (18).
Remove any ground coffee which is lying
around the filter (13).
Replace the filter holder (6) (7).
• Place one or two cups beneath the filter
holder.
• As soon as the control lamp on the coffee
buttons glows continuously, the appliance is
ready to operate.
• Hold down either the one or two cups key
or
(9) (10) (for at least 3 sec) , the
two lamps (coffee key and operating control)
blink.
XP 4050_Europe.P65 28/01/05, 13:5616
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Krups XP 4050 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info