Bedienungsanleitung Krups XP 4050 (Seite 5 von 9) (Englisch)

111232

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

When the desired quantity of espresso has run

through, you stop by pressing the coffee key

(9) (10).

Now the quantity is automatically memorized.

. Hot Water Preparation

You can prepare hot water with this

appliance.

• Fill the water tank (1) (2) (3) and start the

appliance (4).

• Place the cup beneath the auto cappuccino

accessory.

• As soon as the control lamp on the hot

water button glows continuously, the

appliance is ready to operate.

• Pressing the hot water button

(15).

• When the desired quantity of water has run

through, you stop by pressing the hot water

key

(15).

2. STEAM FUNCTION

The tapping noise which occurs while steam is

being produced comes from the intermittent

operation of the pump and has no effect on

the proper working of the appliance.

Beware: during and after use of the machine,

the metallic parts of the auto cappuccino

accessory can become burning hot.

. Using the auto cappuccino accessory

The auto cappuccino accessory makes it easy

to produce frothy milk for making a cappuc-

cino, a latte or a hot chocolate.

• Fill the water tank (1) (2) (3) and start the

appliance (4).

• Put the auto cappuccino accessory in place

on the steam nozzle.

• Place a cup under the auto cappuccino

accessory.

• Pour about 100 ml of very fresh, very cold

milk into a container. The milk and its

container must be well chilled.

• Insert the flexible tube into this container or

directly into the milk carton (17).

Please note the straight cut end of tube must

fit inside auto cappuccino device and the

irregular end dipped in milk.

• Turn the setting knob to the position

“cappuccino” or ‘ latte “.

• When the appliance is ready (operating

control lamp glows continuously), press the

steam button

(16), the operating control

lamp blinks.

• When the control lamp of steam button

glows continuously again, appliance is ready

for steam.

• Press the steam button

(16).

• Once the froth has been produced, stop by

pressing the steam button

(16) for the

following cleaning operation in order to

prevent the milk from drying on the auto

cappuccino accessory.

• Place a cup under the auto cappuccino

accessory.

• Immerse the flexible tube into a clean

container 1/3 full of water.

• Press the steam button

(16) and when all

the water has run through, press the steam

key

(16) to stop.

• Next, clean the auto cappuccino accessory

with a damp cloth.

For more thorough cleaning of the auto

cappuccino accessory, please refer to the

paragraph on maintenance.

. Hot chocolate

• Repeat the same procedure as below after

changing the milk with a chocolate beverage

you want to heat up.

• If your espresso machine is ready for steam -

for 5 min without use, the appliance

switches automatically to coffee stand by.

If you wish to make an espresso immediately

after steam, the appliance must first be

allowed to cool down in order to achieve the

correct temperature for preparing an espresso.

• Appliance automatically cools down when

pressing the coffee button (one or two cups)

- When cooling down, the blue operating

control blinks and hot water flows into drip

tray. When correct temperature is reached,

appliance will run espresso cycle.

XP 4050_Europe.P65 28/01/05, 13:5617

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Krups XP 4050 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info