Bedienungsanleitung Krups XP5220 (Seite 63 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

565305

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

English

n Rinse and dry.

n When not using your espresso coffee maker, do not leave the filter holder on it, in order to prevent wear

to the seal.

For more thorough cleaning, the filter holder can be dismantled:

n You can remove the black plastic part where the coffee outlets and the "EJECT" button are to be found:

turn it to the left and pull sharply (fig. 22).

n Clean the various components under running water and a little gentle washing-up liquid.

n Rinse and dry.

n Replace the black plastic part in the metal holder, turn it to the right until the two arrows on each

component line up.

If the percolation head is heavily clogged up, unscrew the grid using a screw-driver, clean it and refit it,

pressing down firmly (fig.23).

CLEANING OF THE CAPPUCCINO ACCESSORY

n To clean the cappuccino accessory, unclip it from the nozzle by pulling the black ring downwards

(fig.16).

n This accessory is composed of 3 parts: the inner tube, the outer tube and a stainless steel protection.

n To clean this accessory, take it apart completely.

n To remove the inner tube, unscrew the end of the cappuccino accessory.

n You can then remove the stainless steel protection.

n Clean the 3 components under running water and use a small amount of gentle washing-up liquid

(fig. 17). Rinse and dry.

n Once the cappuccino accessory has been cleaned and firmly reassembled, taking care to tighten it

properly, replace it on the nozzle ensuring that the mobile black plastic ring is held downwards.

n Then make a circular movement upwards in order to click the cappuccino accessory into place. Then

clip the black plastic part by moving it upwards (fig.18).

The guarantee does not cover appliances which become faulty because the descaling operations have

not been carried out regularly.

Descale your espresso maker regularly using white vinegar or a packet of citric or sulphamic acid which

you can buy in most hardware stores.

We recommend that you use the Krups descaling accessory, reference F054, available in Krups

authorized service centres. In addition to two descaling sachets, this accessory includes a water hardness

tape tester to assess the required frequency with which your appliance should be descaled, in normal use.

The amount of scale depends on the hardness of the water but also the level of use. The frequency of

descaling given by the F054 accessory is therefore purely indicative. However, you can refer to the

following table:

If in doubt, it is recommended to descale every month.

9. DESCALING

DESCALING FREQUENCY

Ave. number

coffees per week

Soft water

(<19°th)

Hard water

(19-30°th)

Very hard water

(>30°th)

Less than 7 Once a year Every 8 months Every 6 months

From 7 to 20 Every 4 months Every 3 months Every 2 months

Over 20 Every 3 months Every 2 months Every month

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Krups XP5220 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info