Bedienungsanleitung Ksenia Ergo (Seite 7 von 10) (Englisch)

693400

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

SUGGESTION ABOUT THE USE OF THE CAPSENSE TECHNOLOGY

The Keypad you have purchased do not utilize mechnical buttons, but the modern Capsense

Technology. If you already have other devices with capacitive Keypads, you won’t have any issues

in utilizating it and therefore do not need to continue reading this text. If instead it’s your rst time, we

inviteto follow a few small advices in order to obtain rapidly the best performances from this Technology.

Once powered, the Keypad does a self-calibration to adapt its sensitivity to the existing Humidity and

Temperature conditions.

Important note - Please wait 10 to 15 seconds before touching any buttons.

In this stage, it’s important that the keypad is positioned in its actual use conditions, for example if you

are using the desk-mount support, do not live it up-side down. Should this happen, no worries, leave

it with no touch for 10 seconds and it will go in self-calibration again in order to assure a consistent

sensitivity in the course of time.

Attention - Please avoid any contact with wet ngers!

Getting the button’s position, just touch upon with your nger tips, no pressure needed. If you believe

that the sensitivity is too low, do not increase the nger’s pressure, this doesn’t bring any benet. In this

case, it is enough to change the sensitivity setting, available in 3 different levels, by selecting it from the

keypad menù or by programming the setting taking advantage of the basis software.

At last a small test/game - Insert your PIN, surf in the menù with the circular scroll, select a menù (for

example the one which allows to insert a phone number in the phone-book and insert it by digiting on

the keypad). After few minutes only you’ll be surprised about your condence with the

ergo Keypad!

DEFAULT INSTALLER’S PIN: 123456

DEFAULT USER’S PIN: 147258 (active only after the KP has benn assigned to the

lares Control Panel)

KEYPAD FUNCTION DESCRIPTION

KEYPAD

It is conceived for data-entering (data/charachter) during the conguration process, PIN entering

(programmer or user) etc. By touching or exerting a slight pressure on the area corresponding to the

desired number, it allows to enter alphanumeric characters (letters and symbols) in addition to 0-9

numbers , depending on the

operating context (menu). This is possible because the keypad is provided with the tipical mobile phone

mode

technology, which allows to change the entered character depending on the settings (refer to the

following key-characters match chart).

Two ways to move forward the display line are possible while entering a text: using

another key or avoiding touching any key for 3 seconds after the last type.

Key-characters match chart:

KEY FONT:

0 ( ) / % - _ # *

1 “ “ ‘space’ ? ! , . \ ‘ &

A B C a b c 2 $ @

D E F d e f 3 ; <

G H I g h i 4 = >

J K L j k l 5 [ ]

M N O m n o 6 { :

P Q R S p q r s 7

T U V t u v 8 + }

W X Y Z w x y z 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ksenia Ergo Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info