Bedienungsanleitung Ksenia Ergo (Seite 8 von 10) (Englisch)

693400

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

ESC

The ESC key allows to exit the current menu, and go back to the previous level. This means that, wether

in a branched menu, repeated clics on the key will be needed to get back, for exanple to main menu.

A 2-second pressure on the ‘Esc’ key when the keyboard is not used allows the activation of the

cleaning function. As the name suggests, this function disable the keypad functionality for front-

cleaning purposes.

During the keypad block due to the activation of the cleaning function, the following information will

be displayed on the ergo screen:

• First line: “Keypad block”

• Second line: forewarding “.” which marks the keypad block lasting. It means that, as the “.” gets to

the last line character, the cleaning function ends and ergo recovers its regular functionally.

ENTER

DISPLAY

RFID/NFC AREA

The Enter key allows to enter the intended menu when browsing, to start editing during conguration

phase or to conrm the input of a data during an editing session.

In this regard, the following conduct:

• When broswsing the main menu, a pressure on the Enter key allows to enter the submenu and to

keep exploring in case the menu has several branches

• When visualizing the conguration data, a push on the Enter key permits the editing of the data itself

and this involves:

- the congured object ashes if it is slectable with a predened set through the Scroll;

- the rst character of a string ashes in case the string its being edited;

- the rst number ashes when a numeric data or a phone number is being edited.

• During the editing phase, a further pressure on the ENTER key conrms the immission or modication

of the data (which will be sent to gemino or lares that will store it) and the ergo display permits to show:

the following data, the subsequent menu or the data itself.

If “Enter” key is pushed when ergoTM is in standby mode, the display will show the installator’s data

(Name, Number or email address) if they were set during the keypad conguration. In case the

installator’s data were not available, the screen will display the two following default line:

The Display shows all the information and the datas ergo can manage. It consist of 2 lines with 16

characters each (it is not graphic), but it can display longer strings (up to 32 characters) thanks to the

manual and automatic shift functions available on his FW. As a matter of fact, if there’s the need to

display a 32 characters string on the rst dsplay line it will be shifted to and fro 16 characters at any 3

seconds. If the 32 character string were on the second line it would be shifted through the “Right arrow”

and “Left arrow” keys. It will shift one character at any one time when in a data editing phase or 16

characters at any one time when browsing the menu.

The keypad is provided with an internal antenna that allows to detect Tags, Mobile phones or any other

devices provided with chips that work with RFID/NFC 13,56MHz standard simply by approaching it to the

area shown in gure at page 15.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ksenia Ergo Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info