Bedienungsanleitung Ksenia Lares 4.0 (Seite 4 von 58) (Englisch)

693399

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

rev. 0/2018

lares 4.0 PROGRAMMING MANUAL

Below you will ﬁnd the operations which can be controlled via the keypads on BUS by accessing the installer menu with

a PIN code (default: 123456).

You can navigate between the various items by pressing the keys once you have entered the installer menu:

• ENTER: to enter the sub-menu.

• ESC: to exit the sub-menu and return to the previous menu.

• DOWN ARROW (SCROLL CLOCKWISE)/UP ARROW (SCROLL ANTICLOCKWISE): to move from one item to another

within the same menu.

4.4

4.3

4.2

4.1

Alphanumeric keypad with keys from 1 to 9, * e #

ESC key

ENTER key

You can also scroll by using:

4.1 Left arrow

4.2 Down arrow

4.3 Right arrow

4.4 Up arrow

Display

RFID Area

Microphone

Here is the list of installer menu conﬁgurations:

• System management: this item includes the sub-menus for managing the system;

- Alarm reset: selecting this item will stop all of the alarms, and the tamper and alarm memories will be deleted.

- Comm. Reset: selecting this item (you need to conﬁrm it twice) will delete all of the communications which are

both active and queued (SMS, phone calls, e-mail etc.).

- System block: Press ENTER to access the three sub-menus:

1. Unblocked: routine operating mode.

2. Alarm block: block all alarm commands

3. Operation block: blocks all control panel operations.

• User management: it is possible to assign an RF-ID key to conﬁgured users from this menu.

• Event register: outlines the list of events which have taken place, along with their details.

• Fault status: outlines the list of faults in progress.

• Zone status: allows the status of the zones conﬁgured in the system to be displayed.

• Zone test: useful during system installation. This allows you to view the list of zones which have never been assigned

an alarm since the beginning of the TEST.

• Install. info: this menu includes the following sub-menus for managing data associated with the installer

- Change PIN: it is possible to change the installer PIN in this ﬁeld.

- Description: changes the installer name.

- Number: changes the installer telephone number.

N.B: these last three parameters must be modiﬁed by using the keypad. Please refer to the diagram below for the list

of characters associated with the various keys.

Key

1 = 1 [space]? ! , . “ ‘ &

Key 2 = A B C a b c 2 $ @

Key 3 = D E F d e f 3 ; <

Key 4 = G H I g h i 4 = >

Key 5 = J K L j k l 5 [ ]

Key 6 = M N O m n o 6 { :

Key 7 = P Q R S p q r s 7

Key 8 = T U V t u v 8 + }

Key 9 = W X Y Z w x y z 9

Key 0 = 0 ( ) / % - _ # *

Key = deletes the character entered previously. The equivalent to backspace on the PC keypad.

Key # = deletes everything which has been typed.

KEYPAD PROGRAMMING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ksenia Lares 4.0 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info