STEPS
Check the checkbox to select the linkage method. Audible warning, notify surveillance
center, send email, upload to FTP, trigger channel and trigger alarm output are selectable
•Audible Warning
Trigger the audible warning locally.
•Notify Surveillance Center
Send an exception or alarm signal to remote management software when an event
occurs.
•Send Email
Send an email with alarm information to a user or users when an event occurs.
Note:
To send the Email when an event occurs, you need to refer to Section 6.3.10 to set the
related parameters.
•Upload to FTP
Capture the image when an alarm is triggered and upload the picture to a FTP server.
Note:
Set the FTP address and the remote FTP server first. Refer to Section 6.3.8 for detailed
information.
•Trigger Channel
The video will be recorded when the motion is detected. You have to set the recording
schedule to realize this function. Please refer to Section 7.2 for detailed information.
•Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
Note:
To trigger an alarm output when an event occurs, please refer to Section 6.6.4 to set
the related parameters.
6.6.2 CONFIGURING VIDEO TAMPERING ALARM
PURPOSE
You can configure the camera to trigger the alarm when the lens is covered and take
alarm response action.
STEPS
1. Enter the Video Tampering Settings interface:
Configuration > Advanced Configuration > Events > Video Tampering
