6.6.4 CONFIGURING ALARM OUTPUT
STEPS
1. Enter the Alarm Output Settings interface:
Configuration>Advanced Configuration> Events > Alarm Output
2. Select one alarm output channel in the Alarm Output drop-down list. You can also
set a name for the alarm output (optional).
3. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or Manual.
The delay time refers to the time duration that the alarm output remains in effect after
alarm occurs.
4. Click “Edit” to enter the Edit Schedule Time interface. The time schedule
configuration is the same as the settings of the arming schedule for motion detection
Refer to Task 2 Set the Arming Schedule for Motion Detection in Section 6.6.1.
5. Click “Save” to save the settings.
Figure 6.6.8 - Alarm Output Settings
6.6.5 HANDLING EXCEPTION
The exception type can be:
-HDD full
-HDD error
-network disconnected
-IP address conflicted
illegal login to the cameras.
