657919
110
Zoom out
Zoom in
Vorherige Seite
1/152
Nächste Seite
17 TUNING THE ENGINE 108
401951-10
Clean gear teeth
of the shift lever and shift shaft.
Mount the shift lever on the shift shaft in the required position and engage the
gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
Mount and tighten screw
with the washers.
Guideline
Screw, shift lever
(125 XCW EU)
M6 14 Nm
(10.3 lbf ft)
Loctite
®
243™
Screw, shift lever
(150 XCW US)
M6 14 Nm
(10.3 lbf ft)
Loctite
®
243™
Screw, shift lever (All
250/300 models)
M6 14 Nm
(10.3 lbf ft)
Loctite
®
243™
17.10 Engine characteristic auxiliary spring
B00056-10
The auxiliary spring is located on the right side of the engine below the water pump
cover.
Possible states
Auxiliary spring with green color coding Auxiliary spring for soft performance.
Auxiliary spring with yellow color coding Auxiliary spring for more aggressive per-
formance than with a green spring.
Auxiliary spring with blue color coding Auxiliary spring for more aggressive per-
formance than with a yellow spring.
Auxiliary spring with red color coding Auxiliary spring for more aggressive perfor-
mance than with a blue spring.
Auxiliary spring without color coding Auxiliary spring for progressive performance
(at first more aggressive than with the red spring, then softer than with the red
spring).
The engine characteristic can be influenced by different spring strengths of auxiliary
spring
.
Info
The auxiliary spring mounted in the as-delivered state as well as the additionally
available auxiliary springs can differ depending on model.
17.11 Engine characteristic setting the auxiliary spring
Warning
Danger of burnsSome vehicle components become very hot when the vehicle is operated.
Do not touch any parts such as the exhaust system, radiator, engine, shock absorber, or brake system before the vehicle
parts have cooled down.
Let the vehicle parts cool down before you perform any work on the vehicle.
Preparatory work
Tilt the motorcycle to the left and secure against falling in this position.
Guideline
Angle of title approx. 4
E00372-10
Main work
(All 125/150 models)
Remove screws
.
110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für KTM 250 EXC - 2017 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info