4
Use 6 to select the mode and 7 to select
the temperature.
If you wish, you can set the temperature
and mode before programming the timer.
Changing the setting
If you wish to alter a setting you have made –
even if the operation is running.
– Push the appropriate button again and use
+/– to change the value in the display.
When the cooking time is finished
The oven will switch off
and “End” will appear
in the display. A
warning signal will
sound. Both of the
lamps next to the
display will stop flashing.
• Press any selector button to stop the alarm
buzzer.
The display will show the normal clock
again. The oven starts again.
• Turn the temperature control and the mode
selector switch to “0”.
Setting the cooking time (switch-off
function)
The oven switches itself off when the pre-set
time has elapsed.
• Press
: the lamp
will flash and “0.00”
will appear in the
display.
• Use +/– to set the
cooking time in
hours and minutes.
After approx. 3 secs.
the timer will start
and the lamp will
stay on continuously.
The display will show
the time remaining.
Both lamps will flash
alternately.
• Set the temperature and mode.
Setting the finish time (switch-off
function)
Use this function if you want the oven to switch
off automatically after a certain time.
• Press
: the lamp
will flash and “0.00”
will appear in the
display.
• Use +/– to set the
desired switch-off time.
After approx. 3 secs.
the timer will start and
the lamp will stay on
continuously.
The display will show
the time remaining.
Both lamps will flash alternately.
• Set the temperature and mode.
Automatic turn-on and shut-off
If you wish use the oven’s time-delay feature,
you may pre-select both cooking time and
finish time. The automatic start time itself
cannot be specified, but this is derived from
both settings.
It is impossible to set a finish time before the
start time: you will hear a buzzer and the value
in the display will not change. If you wish to
shorten the cooking time you have set, do this
firts before you reset the finish time.
Example:
It is 8:00 and you wish to have your roast
ready at 13.00. The roast needs to be cooked
for 90 minutes.
Change the cooking time
from 0.00 to
1.30. Then change the finish time
from
9:30 to 13:00.
Once the times have been accepted, “Auto”
will appear in the display and the oven will
switch on at 11:30 and off at 13.00.
As well as providing a short-time alarm for
reminders, the electronic timer controls the
oven in several other ways. You can use it to
set the cooking time and the finish time. All
functions are available in any mode or
temperature selection.
Display:
1. Time, alarm time (actual value in each
case).
2. Lamps, showing that the oven is switched on.
3. Heating-up indicator.
4. Lamps (for each selector button/function).
Selector buttons:
Cooking time
Finish time
Alarm time
Adjust:
+/– for altering the values of all functions.
5. Mode selector.
6. Temperature control.
Setting/changing the clock
• Push simultaneously
and , until the
time in the display
flashes.
• Adjuts as required
using +/–.
• Wait for the display
to stop flashing. The
time will then be
accepted, and the
dot in the centre of the hour and the minutes
will flash every second.
Use of the Oven
Setting the alarm time
You can use the alarm on its own, without
effecting the oven.
• Press . The lamp
will flash. The display
will read “0.00”.
• Use +/– to set the
timer in minutes and
seconds.
• Start the timer with
or wait until the
lamp stops flashing.
You will see in the display the time
remaining until the buzzer sounds.
An acoustic signal is generated when the
alarm time has elapsed.
• Press any button to stop the buzzer. The
display will show the normal clock again.
This is how to programme the switching
operations
1. Selecting the operation:
Press the selector button for the operation
you wish to use. The lamp above the button
you have pressed will start to flash and a
number will appear in the display.
2. Altering/adjusting the operation:
Adjust the value shown, using + and –.
3. Starting the operation:
If you do not press another button for 3
seconds, the operation will commence
automatically and the lamp will stay on all
the time.
• You can reduce the time by pressing a
selector button:
–The previously selected button
confirms the input and starts the
operation.
– Another button confirms the input and
selects the new operation you have
chosen.
4. Setting the oven functions (switching
functions only):
5
