Bedienungsanleitung Kyocera CONTAX SL300R T (Seite 9 von 133) (Englisch)

512521

Zoom out

Zoom in

Vorherige Seite

1/133

Nächste Seite

Introduction

• Clean the camera body by wiping with soft cloth. Never use benzene, thinner, or other

volatile solvents or cleansers, since such substances will damage the body materials.

• Do not remove the SD memory card or Multi-Media Card (MMC) while the card access

LED is flashing.

• Interference may occur in recorded or played back images when the camera is used in

areas subject to strong electromagnetic interference (e.g., near a television set or stereo

speakers).

• Do not direct the camera lens directly toward the sun when shooting, since the CCD

element may be damaged.

• If the camera is dropped, it may be damaged internally or parts may have been dislodged

even when there is no visible external damage. The camera must be taken to a Kyocera/

Yashica Service Center for checking.

• Do not attempt to touch the insides of the memory card slot, since damage or malfunction

may result.

• Do not place the camera in places that may be exposed to high temperatures for extended

periods of time (the beach in summer, a closed car under bright sun, etc.). Such high

temperatures may cause adverse affects or damage to the camera, batteries, or memory cards.

• Remove the battery pack before storing the camera for extended periods of time, to prevent

battery leakage and resulting damage.

• Due to the innate characteristics of LCD panels, a few pixels may appear permanently lighted or

may not light at all. This is not a malfunction, and does not affect the recorded image in any way.

• The LCD monitor may appear difficult to see in some outdoor lighting situations.

This camera incorporates a safety circuit to protect its microcomputer against strong external static

electricity. Though rarely, it may fail to function because this safety circuit has come into action.

In this case, turn off the camera’s power, remove the batteries, reload them and use the camera

again.

For best performance, we recommend the use of genuine Kyocera accessories. Kyocera is not

responsible for any accidents or damage caused by the use of accessories made by other

manufacturers or fashioned by the user.

CAUTION

• Store the camera in a well-ventilated location, avoiding damp or dusty areas,

drawers or boxes containing mothballs, or in laboratories or other locations

where chemicals are handled. Exposure to such chemical fumes can result in

damage to the camera’s circuitry, resulting in short circuits and causing the

camera to emit smoke or catch fire.

CAUTION

• Rubbing or pressing strongly on the LCD monitor screen can result in

damage or malfunctions. If there is dust or dirt on the LCD monitor, blow it off

with a blower brush. Heavy soiling should be wiped off using soft cloth.

•

If the LCD monitor should become broken, take precautions to prevent personal

injury from glass fragments.

•

If the LCD monitor breaks and its liquid contacts your skin, quickly wipe away any

remaining liquid and wash the skin with soap and water. If the liquid should enter

the eyes, wash with clean running water for at least 15 minutes, then seek

medical attention immediately.

Finecam_E.book Page 9 Thursday, August 28, 2003 6:21 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera CONTAX SL300R T Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info