Bedienungsanleitung Kyocera FS6020 (Seite 82 von 110) (Englisch)

20377

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

Chapter 4 Troubleshooting

4-5

Check

process unit

The process unit or toner container is not installed correctly.

Reinstall either of them correctly. See

Toner Container Replacement on page 3-1

The printer does not operate when this message is displayed.

Close duplexer

rear cover

The rear cover of the option duplexer is open.

Close the rear cover.

top cover

The top or front cover of the printer is open.

Close the printer top or front cover.

Close rear

cover

The rear cover of the printer is open.

Close the printer rear cover.

Face-down tray

paper full

The face-down tray has become full (approx. 250 pages).

You must remove all printed pages from the face-down tray. When the printer senses that the face-

down tray is empty again, it will continue printing into the face-down tray.

Load Cassette 1(to 5)

(paper size)/(paper type)*

*(paper size) and (paper

type) are displayed flashing

alternately.

There is data for printing that matches with a paper cassette setting (paper size, paper type),

but there is no paper in the paper cassette.

Set paper into the paper source as displayed on the operator panel, and press the GO key to restart

printing. However, the paper cassette numbers (2 to 5) are only displayed when there is an

option paper feeder installed.

Or, if you want to print from a different paper source, press the or key to display Use

alternative? and you can change the source for paper feeding.

After selecting a paper source and pressing the MENU key, Paper Handling > appears. By

pressing the key, the paper type settings menu appears. After setting the correct paper type,

press the ENTER key and printing starts.

Load MP tray

(paper size)/(paper type)*

*(paper size) and (paper

type) are displayed flashing

alternately.

There is no paper cassette set (paper size, paper type) that matches with the data for printing,

so printing is done from the MP tray.

Set paper into the MP tray that matches the paper size and type shown on the display and press

the GO key to restart printing.

Or, if you want to print from a different paper source, press the or key to display Use

alternative? and you can change the source for paper feeding.

After selecting a paper source and pressing the MENU key, Paper Handling > appears. By

pressing the key, the paper type settings menu appears. After setting the correct paper type,

press the ENTER key and printing starts.

Missing

duplexer

The option duplexer is not Installed.

The option duplexer installed has been removed or installed incorrectly.

Re-install the duplexer correctly.

Option interface

Error ##

A failure has occurred with the option network interface card.

Check the option network interface card installed in the printer.

Paper jam

###############

A paper jam has occurred.

Open the printer’s cover(s) or the paper cassette(s) and correct the paper jam (or paper mis-

feeding in the paper cassette). The location of the paper jam is also indicated in place of the #’s.

Online help messages which are useful for correcting the paper jam will be displayed by pressing

the key. (See

Correcting a Paper Jam on page 4-8

Paper path error Any of the paper cassettes installed above the specified paper source is open.

Close the paper cassette.

Replace toner

TK-400

The printer has stopped due to lack of toner.

Replace the toner container using a new toner kit. The printer does not operate when this

message is displayed. See

Toner Container Replacement on page 3-1

Toner low

TK-400

Toner is running low.

Replace the toner container using a new toner kit and upon completion of replacement, clean the

internal parts of the printer. See

Toner Container Replacement on page 3-1

: Alarm buzzer sounds when an error occurs. Press the CANCEL key to stop the alarm buzzer.

(Continued on next page)

Message Corrective Action

;Ò

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera FS6020 Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info