Bedienungsanleitung Kyocera FS9520DN (Seite 14 von 115) (Englisch)

20438

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

2-1

Chapter 2 Handling Paper

This chapter explains the following topics:

• General Guidelines

• Special Paper

• Paper Type

• How to Load Paper

The printer is designed to print on high-quality copier bond

paper (the kind used in ordinary dry copier machines), but it

can also accept a variety of other types of paper within the

limits specified below.

The manufacturer assumes no liability for problems that

occur when paper not satisfying these requirements is used.

Selection of the right paper is important. Using the wrong pa-

per can result in paper jams, misfeeding, curling, poor print

quality, and paper waste, and in extreme cases can damage

the printer. The guidelines given below will increase the pro-

ductivity of your office by ensuring efficient, trouble-free

printing and reducing wear and tear on the printer.

Most types of paper are compatible with a variety of ma-

chines. Paper intended for xerographic copiers can also be

used with the printer.

There are three general grades of paper: economy, standard,

and premium. The most significant difference between grades

is the ease with which they pass through the printer. This is

affected by the smoothness, size, and moisture content of the

paper, and the way in which the paper is cut. The higher the

grade of paper you use, the less risk there will be of paper

jams and other problems, and the higher the level of quality

your printed output will reflect.

Differences between paper from different suppliers can also

affect the printer’s performance. A high-quality printer can-

not produce high-quality results when the wrong paper is

used. Low-priced paper is not economical in the long run if it

causes printing problems.

Paper in each grade is available in a range of basis weights

(defined later). The traditional standard weights are 16, 20,

and 28 pounds (60 to 105 g/m

The following table summarizes the basic paper specifica-

tions. Details are given on the following pages.

Minimum and maximum paper sizes

The minimum and maximum paper sizes are as follows. For

non standard paper such as cut-sheet, the MP (multi-pur-

pose) tray must be used.

Figure 2-1

1. General Guidelines

NOTE

1.1 Paper Availability

1.2 Paper Specifications

Item Specification

Weight Cassette: 60 to 105 g/m

(16 to 28 lb/ream)

MP tray: 60 to 200 g/m

(16 to 53 lb/ream)

Thickness 0.086 to 0.110 mm (3.4 to 4.3 mils)

Dimensional accuracy ±0.7 mm (±0.0276 inches)

Squareness of corners 90° ±0.2°

Moisture content 4 to 6 %

Direction of grain Long grain

Pulp content 80 % or more

Table 2-1

88 mm

3-7/16 inches

11-11/16 inches

148 mm

5-13/16 inches

297 mm

450 mm

18 inches

148 mm

Paper Cassette

Minimum

Paper

Size

Minimum

Paper

Size

MP Tray

5-13/16 inches

210 mm

8-1/4 inches

297

11-11/16 inches

432 mm

17 inches

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera FS9520DN Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kyocera FS9520DN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info