Bedienungsanleitung Kyocera FS9520DN (Seite 15 von 115) (Englisch)

20438

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

Chapter 2 Handling Paper

2-2

Laser printing is a process involving laser light, electrostatic dis-

charge, toner, and heat. In addition, as the paper passes through

the printer it undergoes considerable sliding, bending, and twist-

ing motions. A high-quality printing paper matching the print-

er’s requirements withstands all these stresses, enabling the

printer to turn out clean, crisp printed copies consistently.

Remember that all paper is not the same. Some of the factors

to consider when selecting paper for the printer are as follows:

Condition of the Paper

Avoid using paper that is bent at the edges, curled, dirty, torn,

embossed, or contaminated with lint, clay, or paper shreds.

Use of paper in these conditions can lead to illegible printing,

misfeeding, and paper jams, and can shorten the life of the

printer. In particular, avoid using paper with a surface coat-

ing or other surface treatment. The paper should have as

smooth and even a surface as possible.

Composition

Do not use paper that has been coated or surface-treated and

contains plastic or carbon. The heat of fusing can cause such

paper to give off harmful fumes.

Bond paper should contain at least 80 % pulp. Not more than 20 %

of the total paper content should consist of cotton or other fibers.

Paper Size

Cassettes and an MP tray are available for the paper sizes

listed in the table below. The dimensional tolerances are ±0.7

mm (±0.0276 inches) for the length and width. The angle at

the corners must be 90° ±0.2°.

Paper with other sizes (custom sizes) can also be fed from the

MP tray. The minimum size paper for manual feed is 88 × 148

mm (3-1/2 × 5-13/16 inches), fed lengthwise. The maximum

size is 297 × 450 mm (11-11/16 × 17-3/4 inches).

Smoothness

The paper should have a smooth, uncoated surface. Paper with

a rough or sandy surface can cause voids in the printed output.

Paper that is too smooth, however, can cause multiple feeding

and fogging problems. (Fogging is a gray background effect.)

Basis Weight

Basis weight is the weight of a standard quantity of paper. In

the traditional system, the standard quantity is a ream con-

sisting of 500 sheets measuring 17 × 22 inches each. In the

metric system the standard quantity is 1 square meter.

Paper that is too light or too heavy can cause misfeeding,

jams, and premature wear of the printer. Uneven paper

weight can cause multiple feeds, print defects, poor toner fus-

ing, blurring, and other print quality problems. The proper

weight is 60 to 105 g/m

for the paper cassette, and 60 to 200

g/m

for the MP tray.

Thickness (Caliper)

Thick paper is referred to as high-caliper paper and thin pa-

per as low-caliper paper. The paper used with the printer

should be neither extremely thick nor extremely thin. If you

are having problems with paper jams, multiple feeds, and

faint printing, the paper you are using may be too thin. If you

are having problems with paper jams and blurred printing,

the paper may be too thick. The proper thickness is 0.086 to

0.110 mm (3.4 to 4.3 mils).

1.3 Selecting the Right Paper

MP tray Size

Monarch 3-7/8 × 7-1/2 inches

Business 4-1/8 × 9-1/2 inches

Commercial 9 3-7/8 × 8-7/8 inches

Commercial 6-3/4 3-5/8 × 6-1/2 inches

International DL 11 × 22 cm

International C5 16.2 × 22.9 cm

ISO A6 105 × 148 mm

JIS B6 128 × 182 mm

International B5 17.6 × 25 cm

Executive 7-1/4 × 10-1/2 inches

International C4 229 × 324 mm

Oficio II 8-1/2 × 13 inches

Hagaki 100 × 148 mm

Oufuku Hagaki 148 × 200 mm

Youkei 2 114 × 162 mm

Youkei 4 105 × 235 mm

8K 273 × 394 mm

16K 197 × 273 mm

Table 2-2

Cassette or MP tray Size

Ledger 11 × 17 inches

Legal 8-1/2 × 14 inches

Letter 8-1/2 × 11 inches

Statement 5-1/2 × 8-1/2 inches

Folio 210 × 330 mm

ISO A3 297 × 420 mm

ISO A4 210 × 297 mm

ISO A5 148 × 210 mm

JIS B4 257 × 364 mm

JIS B5 182 × 257 mm

Table 2-3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera FS9520DN Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kyocera FS9520DN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info