435980
18
Zoom out
Zoom in
Vorherige Seite
1/76
Nächste Seite
Section 2 NAMES OF PARTS
2-4
(1) Start key & indicator
(Press this key when you want to start copying. Copying will
begin immediately if you press this key when the indicator is
lit green.)
(2) Reset/Power key
(Press this key when you want to cancel the currently entered
setting(s) and return to those registered for the initial mode.
Press down on this key for at least 3 seconds when you want to
engage the Off mode. When you want to release the copier
from the Off mode, press any one of the keys on the operation
panel. See page 2-5.)
(3) Stop/Clear key
(Press this key when you want to stop copying. Press down on
this key for at least 3 seconds when you want to view the total
copy count. See page 6-10.)
(4) Copy quantity/magnification display
(Displays the number of copies to be made or the currently
selected magnification ratio. When the “%” symbol is lit, the
displayed number is the currently selected magnification
ratio.)
(5) Exposure adjustment keys
(Press the left key when you want to make the copy exposure
lighter and the right key to make the exposure darker. Press
down on both keys at the same time for at least 3 seconds
when you want to access the default settings mode.)
(6) Image quality select key
(Press this key when you want to select the desired image
quality mode. See page 4-1.)
(7) Number of Copies / Zoom(+) key
(Press this key when you want to raise the number of copies to
be made, as well as to increase the currently selected copy
magnification ratio. Press this key as well during default
settings in order to select the desired default item or setting.)
(8) Number of Copies / Zoom(-) key
(Press this key when you want to lower the number of copies
to be made, as well as to decrease the currently selected copy
magnification ratio. Press this key as well during default
settings in order to select the desired default item or setting.)
(9) Recall%/Enter key
(Press this key when you want copy in the Zoom mode. Press
this key as well during default settings in order to select the
current default item or register the currently displayed
setting. See page 4-4.)
(10) Reduce/Enlarge key
(Press this key when you want to use the Preset Zoom mode.
See page 4-5.)
(11) Paper Select key
(Press this key when you want to switch paper feed between
the drawer(s) and the multi-bypass tray. The indicator for the
currently selected source of paper feed will be lit green. Press
down on this key for at least 3 seconds when you want to
access the default items for paper size selection. See page 4-1.)
(12) Thick Paper key & indicator
(Press this key when you want to copy onto thick paper. Make
sure that the Thick Paper indicator is lit green. See page 3-9.)
(13) 2in1/4in1 key & indicators
(Press this key when you want to copy with the Layout modes.
Make sure that the 2in1 or the 4in1 indicator, as appropriate,
is lit green. Press down on this key for at least 3 seconds when
you want to access the default items for the Layout modes. See
page 5-1 for more information on the Layout modes.)
(14) Sort key & indicator
(Press this key when you want to copy with the Sort mode.
Make sure that the Sort indicator is lit green. See page 5-9.)
Operation panel
(1)
(2)
(3)
(14)
(15)
(10)(7)(9)(8)(11)(5)(6)
(13)
(16)
(4)(17)(12)
(24)
(23)
(19)
(21)
(22)
(18)
(20)
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kyocera km 1500 laser 15ppm wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info