Bedienungsanleitung Kyocera KM6230 (Seite 15 von 167) (Englisch)

17490

Zoom out

Zoom in

Vorherige Seite

1/167

Nächste Seite

Section 2 NAMES OF PARTS

2A080030A

KM-6230 (KME)

/ 131

(1) Main body

1 Front cover

2 Operation panel

3 Original size indicator lines

(When setting an original on the platen, align it with the appropriate

lines.)

4 Platen

5 Cover on the right side of the operation panel

(Open this cover when adding toner.)

6 Original tray

(Depending upon the country or region where you purchased your

copier, this part may not be included.)

7 Right upper cover

(Open this cover if paper misfeeds in the paper feed section.)

8 Right lower cover

(Open this cover if paper misfeeds in the paper feed section.)

9 Front Deck

(Holds up to 3,000 sheets of standard [75 g/m

or 80 g/m

] paper.)

0 Drawer 1

(Holds up to 500 sheets of standard [75 g/m

or 80 g/m

] paper.)

! Drawer 2

(Holds up to 500 sheets of standard [75 g/m

or 80 g/m

] paper.)

@ Paper width guides

# Paper length guide

$ Stack bypass tray

(Load paper here when copying onto small-size or special paper.)

% Support extension

^ Insert guides

& Paper feed section knob

(Turn this knob to remove paper that has been misfed in the paper

conveyor section.)

* Paper conveyor section

( Paper conveyor section release lever

(Operate this lever if paper misfeeds in the paper conveyor section.)

) Fixing unit

⁄ Fixing unit knob

(Turn this knob to remove paper that has been misfed in the fixing

unit.)

¤ Total counters

(The number displayed on the upper line indicates the number of origi-

nals that have been scanned for copying. The bottom line indicates

the number of copies made.)

‹ Instruction handbook box

(Keep the instruction handbook here.)

› Transport handles

(Use these handles when moving this machine. There are a total of

four transport handles in all.)

ﬁ Paper ejection cover

(Open this cover if paper misfeeds in the fixing unit or ejection sec-

tion.)

ﬂ Main switch

(Turn this switch ON ( | ) before copying.)

‡ Waste toner tank cover

(Open this cover when replacing the waste toner tank.)

Waste toner tank

● DF (Document Feeder)

(Automatically feeds and scans each original, one by one, for copying.)

· Original table

(Set the originals that you want to copy on this table.)

‚ Original insert guides

(Adjust these guides to match the width of the originals set in the DF.)

Œ Original set indicator

(Indicates the status of the originals in the DF.)

Lights green: The originals are set properly. Press the Start key to start

copying.

Blinks green: The originals are not set properly. Reset the originals in

the DF.

Blinks red: An original has been misfed. See page 10-11 and remove

the misfed originals.)

„ DF open/close handle

(Hold this handle when opening and closing the DF.)

´ Original ejection table

(Copied originals are stored here.)

‰ Original reversing cover

(Open this cover if an original misfeeds in the DF.)

ˇ Original ejection guide

(Open this guide when copying from originals of 8-1/2" x 14" [A4] or

larger.)

● Duplex unit

(Paper is turned over in this unit when you make two-sided copies.)

Á Re-feeding section

¨ Duplex cover

(Open this cover if paper misfeeds in the duplex unit.)

2-2

E_Sec2_Name.PM6 10/13/00, 13:363

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera KM6230 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info