3. Reassemble the cover. Reinsert the pressure release valve and spring and replace
the valve cover. Reattach the knob to the valve stem by tightening the screw with
the supplied spanner key in a clockwise direction. Be sure the knob is securely
fastened to the pressure release valve stem.
Note: It is normal that there is a gap between the valve cover and the cover of the
pressure cooker to allow steam to escape.
Gasket Cleaning and Maintenance
It is recommended to replace the gasket at least once every 12 months,
depending on the frequency of use.
• Remove the gasket from the cover after each use and wash it by hand in warm,
soapy water. NEVER WASH THE GASKET IN A DISHWASHER.
• If food gets stuck to the gasket, do not scrub with abrasive cleaners or attempt to
scrape off the food using any tools or even fingernails as this could tear the gasket
material. Instead, soak the gasket in warm, soapy water until the food loosens easily.
After cleaning, dry thoroughly.
• Before each use, and before storing the gasket in the cover, apply a thin coating of
vegetable oil onto the gasket with your thumb and finger.
• Before cooking, ensure that the gasket is not twisted and is secured evenly in the
groove around the entire circumference of the cover. Never use force to close the
cover if it is difficult to slide closed. Instead, remove the cover, remove the gasket,
and lightly re-lubricate it with vegetable oil. Reinsert the gasket in the cover and try
again.
• To store, place the gasket in the cover and place the cover upside-down on the
pressure cooker body in order to avoid damaging the gasket.
SAVE THESE INSTRUCTIONS
KNOB
VALVE COVER
VALVE BODY
SPRING
PRESSURE RELEASE VALVE
13
