Bedienungsanleitung Laica VT3113 (Seite 12 von 22) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

677550

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

24 25

English

operation anomalies, do not keep using the device and, if necessary, refer

to the manufacturer directly.

DISPOSAL PROCEDURE (Dir. 2012/19/Eu-WEEE)

The symbol on the bottom of the device indicates the separated

collection of electric and electronic equipment.

At the end of life of the device, do not dispose it as mixed solid

municipal waste, but dispose it referring to a specific collection

centre located in your area or returning it to the distributor, when buying a

new device of the same type to be used with the same functions.

If the appliance to be disposed of is less than 25 cm, it can be returned to

a retail location that is over 400 m² without having to purchase a new, similar

device.

This procedure of separated collection of electric and electronic devices is

carried out forecasting a European environmental policy aiming at safeguarding,

protecting and improving environment quality, as well as avoiding potential

effects on human health due to the presence of hazardous substances in

such equipment or to an improper use of the same or of parts of the same.

Caution! The wrong disposal of electric and electronic equipment may involve

sanctions.

WARRANTY

This equipment is covered by a 2-year warranty starting from the purchase

date, which has to be proven by means of the stamp or signature of

the dealer and by the fiscal payment receipt that shall be kept

enclosed to this document. This warranty period complies with the laws

in force and applies only in case the consumer is an individual.

Laica products are designed for domestic use only; therefore, their use for

commercial purposes is forbidden.

The warranty covers only production defects and does not apply, if the

damage is caused by accidental events, misuse, negligence or improper

use of the product.

Use the supplied accessories only; the use of other accessories invalidate

the warranty cover.

Do not open the equipment for any reason whatsoever; the opening or the

tampering of the equipment, definitely invalidate the warranty. Warranty

does not apply to parts subject to tear and wear along the use, as well as to

batteries, when they are included. Warranty decays after 2 years from the

purchase date.

In this case, technical service interventions will be carried out against

payment. Information on technical service interventions, under warranty

terms or against payment, may be requested by writing at info@laica.com.

Repair or replacement of products covered by the warranty terms are free of

charge. In case of faults, refer to the dealer; DO NOT send anything directly

to LAICA.

All interventions covered by warranty (including product replacement or the

replacement of any of its parts) shall not be meant to extend the duration of

the original warranty period of the replaced product.

The manufacturer cannot be made liable for any damages that may be caused,

directly or indirectly, to people, things and pets resulting from the inobservance

of the provisions contained in the suitable user manual, especially with

reference to the instructions related to installation, use and maintenance of

the equipment.

Being constantly involved in improving its own products, Laica reserves the

right to modify its product, totally or partially, with reference to any production

need, without that this involves any responsibility whatsoever by Laica or

its dealers.

TROUBLESHOOTING

Instructions and warranty

VACUUM PACKAGING MACHINE

PROBLEMS TROUBLESHOOTING

The device does not work

• Check that the plug is well inserted into the power supply outlet.

• Verify whether the warning light is switched on.

• The thermal protection has tripped: let the device cool down for at least 30 minutes

and switch it on again.

The device does not create the complete vacuum in the bag

• The bag could have been pierced.

Try to replace it with a new one.

• Verify the correct position of the bag within the suction chamber.

• The sealing strip could have been overheated: this occurs when many sealing procedures are

performed consecutively at very short intervals; await some minutes to let the sealing strip cool

down. Between one sealing and the following, we suggest to await at least 2 minutes.

The bag does not keep the vacuum condition after it has been

sealed

• Check that the bag is not pierced. Protect any pointed edge with pieces of paper serviettes.

• Check that along the sealing there are not impurities: crumbs, fat, etc. Re-open the bag and try again

to perform the sealing.

The bag melts and is not sealed in the right way

• Make sure that the inner part of the bag is clean and that it is well stretched.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Laica VT3113 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info