Bedienungsanleitung Lanaform LA100207 (Seite 9 von 56) (Englisch, Holländisch, Französisch)

719228

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

English 9 / 56

EN FR NL

biphasic pulses. The digital TENS/EMS only has

biphasic pulse currents because they relieve

muscles in order to reduce muscle fatigue and

ensure safe use.

Frequency of pulses

The frequency indicates the number of pulses

per second. It is displayed in Hz (Hertz). It de-

termines the types of muscle bres responding

as a priority. The slow-responding bres react

instead to the low pulse frequencies up to  Hz

whereas the rapid-response bres only react

from about  Hz.

In the presence of pulses between approxi-

mately  and  Hz, the muscles contract

continually and quickly tire. The higher pulse

frequencies can therefore be used as a prior-

ity for rapid strength training and maximum

strength training.

Width of pulses

It indicates the length of a pulse in microsec-

onds. The width of pulses also determines

the depth of penetration of the current. The

following rule therefore generally applies : the

bigger the muscle mass, the wider the pulses.

Pulse intensity

Setting the level of intensity depends on the

subjective impact of each user and is deter-

mined by the number of parameters such as

the area of application, skin irritation, skin

thickness and the quality of contact with the

electrodes. Convenient control must be eec-

tive but should never produce unpleasant sen-

sations such as, for example, pain at the appli-

cation site. Whereas a slight tingling indicates

that the energy from stimulation is sucient,

any setting that causes pain must be avoided.

In the event of prolonged use, adjustment may

be necessary due to the adjustment processes

over time at the application site.

Variation in the pulse

parameters controlled

by the cycle

In some cases, all the tissue structures must

be covered at the application site by using

several pulse parameters. On the digital TENS/

EMS, the existing programmes automatically

undergo a cyclical modication of the pulse

parameters. This also has a preventive eect

on the fatigue of the various muscle groups

at the application site. The digital TENS/EMS

includes logical pre-setting of the current’s

parameters. You have the option, however, of

modifying the intensity of the pulses at any

time when using it.

DESCRIPTION OF THE DEVICE

Front panel



1 LCD screen

2 Increase in the intensity of channel 1

o n/off

button

4 Reduction in the intensity of channel 1

5 Casing

6 Button for selecting the TENS

function and a TENS programme

7 Increase in the intensity of channel 2

8 Reduction in the intensity of channel 2

9 Button for selecting the EMS func-

tion and an EMS programme

Top



1 Output plug for channel 1 : output of

the electrical signal from channel 1 after

connecting the cable and the electrodes.

2 Output plug for channel 2 : output of

the electrical signal from channel 2 after

connecting the cable and the electrodes.

E-IM-MediStim-001.indd 9 19/12/2017 14:45:34

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lanaform LA100207 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info