Bedienungsanleitung Lanaform LA100207 (Seite 11 von 56) (Englisch, Holländisch, Französisch)

719228

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

English 11 / 56

EN FR NL

of application required together with your

doctor.

When using the Medi Stim and when you ap-

ply the electrodes, you are advised to use two

electrodes per muscle group. For assistance,

see [



6].

Position the electrodes so that they surround

the muscle segments concerned. For opti-

mum eectiveness, the distance between

the electrodes should not be greater than ap-

prox. cm. The greater the distance chosen

between the electrodes, the greater will be the

volume of tissue stimulated. This applies to the

surface and the depth of the volume of tissue.

Likewise, the greater the distance between the

electrodes, the more the power stimulating

the tissue decreases. This means that if you opt

for a large distance between the electrodes,

the volume will be greater but stimulation less

so. To increase stimulation, you will then need

to increase the pulse intensity. The following

instructions apply when choosing the distance

between electrodes :

• The most appropriate dis-

tance: approx. 5 to 15cm

• Below 5cm, the primary surface

structures are strongly stimulated.

• Above 15cm, the deep structures

extending across the large surface

areas are very poorly stimulated.



We do not recommend using

two electrodes on opposite sides

of the centre of the body (for

example: the electrode of the

rst cable on your left arm and

the electrode of the second cable

on your right arm). See [



7].



Never apply the electrodes

to your head or pectorals. Never

move the electrodes when the

device is running. Switch o

the device, then simply remove

the electrodes and put them

in a dierent place, otherwise,

some impact might be felt.

Operating the device

• Once the electrodes are in position in the

area you want to treat, switch on your

device with the

o n/off

button [





3].

• Press the

tens

button to switch to

the TENS mode or the

e ms

button to

switch to the EMS mode [





6 or 9].

• Press the

tens

e ms

button again

once or several times, depending on the

mode chosen, until the number of the

programme required is displayed [





7].

• In the TENS mode, press the

e ms

button

to enter the EMS mode, the screen

will display EMS programme 1 and

the intensity will be lower. Likewise,

in the EMS mode, press the

tens

button to enter the TENS mode.

• Once the mode and the programme

are selected, press

to activate

electro-stimulation [





2 and/or 7].

This sets o the lowest intensity.

• The clock indicator shows that elec-

tro-stimulation is underway [





2].

• During electro-stimulation, press

again until the required intensity

is reached and

to reduce the

intensity [





4 and 8]. There are 20

possible intensities per programme.

With each variation, the intensity of

the channel increases or decreases

by 1mA and the amplitude by 1V.

E-IM-MediStim-001.indd 11 19/12/2017 14:45:35

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lanaform LA100207 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info