646737
18
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
DualAxis-Laser
18
Short instructions
Switching the
unit on for the
first time
Switch the unit on using the ON/OFF button (34). The
laser rotates at a speed of 600 rpm and the automatic
sensors are active.
Remote control The remote control can be used to control all functions
except slope entry. Standby mode is a special feature:
press the standby button (36) to switch the DualAxis-
Laser to standby mode. All settings are retained.
Rotating speed Press the rotation button (35) to switch speeds (0; 300;
600; 1100 rpm).
Digital slope
function
Press the X button (27): The first digit starts to flash.
Press the plus/minus buttons (28) to enter a positive
(„0“) or negative value („-“). Press the X button to
select the values of subsequent digits. Numerical values
can be set using the plus/minus buttons (28). The Y but-
ton functions in the same way as the X button.
Important: You must confirm your entries by pressing
Enter (29); the rotary laser will then set the required
value. Value entry is disabled during levelling („SLOPE“
flashes on the LCD (19)). Once levelling is complete and
value entry has been reactivated, „SLOPE“ will stop flas-
hing and will be displayed permanently on the LCD.
Manual slope
function
This function is used to deactivate sensor automation.
Significant deviations from the horizontal and vertical
planes can now be configured. To do this, press the
auto/man button (32). „MAN“ will appear on the LCD
(24). Note: The DualAxis-Laser is not capable of motori-
zed slope traversal in auto/man mode. Important: Since
the automatic sensors are not active, horizontal levelling
is not possible.
ENGLISH
(34)
(35)
(29)
(27) (31)
(28) (28)
(32)
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Laserliner DualAxis-Laser wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info