646737
19
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
DualAxis-Laser
19
Tilt
function
Once the rotary laser has been levelled and the auto-
matic sensors are running, press the tilt button (33). It
takes approximately 30 seconds to activate tilt. If you
move the unit during this time, it will switch itself off.
The laser and „TILT“ (22) flash. Press the tilt button
again to reactivate the automatic sensors; tilt will be
reactivated within approximately 30 seconds. Once the
tilt function has been activated, it can be deactivated by
pressing the tilt button again.
Important: The tilt function is not active in standby
mode.
Laser segment
mode
Press the segment button (30). The top segment (21)
flashes on the LCD. Use the plus/minus buttons (28)
to activate/deactivate the segment. Press the segment
button again to move to the next segment. Press Enter
(29) to confirm the setting and transfer it to the laser.
Illuminated
display
Press and hold down Enter (29) on the rotary laser for
at least 2 seconds to activate/deactivate the illuminated
display.
Power manage-
ment
The unit can run on rechargeable batteries, standard
alkaline batteries and a mains power supply. Running
the unit on a mains power supply will charge its rechar-
geable batteries.
Calibration Press and hold down the auto/man button (32). With
the auto/man button held down, press the ON/OFF
button (34) until CAL (37) appears on the display. Open
the calibration compartment on the remote control unit
and select the X axis by pressing the X/Y button (38).
You can now set the selected axis using the plus/minus
buttons (39). Proceed in the same way to set the Y axis.
Save the new setting by pressing Enter (40).
ENGLISH
(33)
(30)
(28) (28)
(29)
(29)
(32) (34)
(39) (39)
(35)
(40)
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Laserliner DualAxis-Laser wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info