Bedienungsanleitung Leica S 007 (Seite 32 von 72) (Englisch)

594983

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Recording mode

Marking of clearly focused subjects (focus peaking)

In Live View mode, the Leica S can mark subjects imaged with optimum

focus in the monitor picture by highlighting their contours. This simpliﬁes

their recognition and hence in particular the manual setting of the focus.

The three available colors permit adaptation to any background.

Setting the function

1. In the menu, under SETUP , select the item Capture Assistants and

2. select

Focus Peaking in the sub-menu

3. Call up the sub-menu, and

4. select the desired color there

• All subject details that are in focus at the set range are indicated

by outlines in the selected color.

Further information on setting the focus can be found in the correspond-

ing sections.

Note:

When using high ISO values and/or slow shutter speeds, the function

may not work.

Important:

This function is based on the subject contrast, i.e. light/dark diﬀerences.

Therefore, subject details that are not completely in focus but have a

high contrast may also be marked.

Grid

The Leica S oﬀers you two variants of grid lines as an aid to picture

composition.

Setting the function

1. In the menu, under SETUP , select the item Capture Assistants,

2. select

Grids in the sub-menu, and

3. select

3x3 or 6x4 in the sub-menu

• If the view with horizon and grid is selected, the selected grid is

displayed in the monitor.

Horizon

Thanks to integrated sensors, the Leica S can show their orientation both

in the viewﬁnder and on the monitor. These displays enable you to align

the camera precisely in the longitudinal and transverse axes to capture

critical subjects, e.g. architecture pictures.

The corresponding display always appears in the viewﬁnder, on the

monitor as required.

• If the view with horizon and grid is selected, a vertical scale and a

horizontal bar appear in the monitor. The horizontal orientation in the

longitudinal and transverse axes is indicated by a green line in the

middle, deviations from the respective zero positions by red dotted

lines.

Notes:

• The display precision is ≤1°.

• The display switches over automatically for portrait format pictures.

Masking

In addition to the standard aspect ratio (2:3) for photos, three further

ratios are available when using the DNG format: 1:1, 16:9, 2:1. They

open up further composition possibilities while taking the picture.

Setting the function

1. In the menu, under SETUP , select the item Capture Assistants,

2. select

Photo Masks in the sub-menu, and

3. select the desired format there

• The monitor picture is masked accordingly, with 1:1 left and right,

with 16:9 and 2:1 top and bottom. While taking the photograph

the mask is transparent, during review of corresponding photos in

the camera it is not.

Note:

Irrespective of the aspect ratio selected, the whole 2:3 image ﬁeld is

always recorded, i.e. the masking of the monitor picture aﬀects only the

display in the camera. Although the photo is initially displayed with the

selected aspect ratio in image processing programs, it is possible to

delete the masking there so that the whole 2:3 image ﬁeld is available

again.

Enlarging the Live View monitor image

Select diﬀerently enlarged details:

Press the button bottom left next to the monitor repeatedly

• This gives in turn

– Double the size

– Four times the size

– Back to normal size

• The buttons are not displayed with the enlarged view; a frame appears

in the bottom left-hand corner that indicates the position of the detail

in the picture.

Shift the detail:

Press the Joystick left, right, up or down

Notes:

• The grid line display is not available with the enlarged view.

• After switching Live View mode oﬀ and on again, the last displays

selected are active again, but not the enlarged detail.

• Switching the camera oﬀ and on again displays the last detail selected.

Inhalt_EN.indd 28 20.08.2015 14:14:43

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S 007 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S 007

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info