Bedienungsanleitung Leica S 007 (Seite 33 von 72) (Englisch)

594983

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Recording mode

DISTANCE SETTING

With all S lenses, the Leica S oﬀers you the choice between manual or

automatic distance setting. The autofocus system determines the dis-

tance to the subject details in the middle of the image ﬁeld; this area is

marked with a crosshair on the focusing screen and, in Live View mode,

also in the monitor.

Irrespective of the operating mode, a display in the viewﬁnder provides

information on the respective setting:

– The left-hand triangle indicates the focus set too long (appears only in

Manual mode or with manual override of the autofocus) - The middle

dot shows a correct setting (is lit constantly), or if the system cannot

determine the distance (ﬂashes)

– The right-hand triangle indicates the focus set too short (appears only

in Manual mode or with manual override of the autofocus) Further

details on the displays can be found in the Annex under "The displays"

/ "In the viewﬁnder".

Note:

The metering system operates passively on the basis of contrasts, i.e.

diﬀerences in light/dark in the part of the subject being photographed. It

is therefore dependent on a certain minimum brightness and contrast in

the subject.

Setting the operating mode

1. In the menu, under CAMERA , select the item Focus Mode and

2. select the desired option in the sub-menu

Manual setting - MF

Turn the distance setting ring on the lens so that your subject or the most

important part of the subject is fully in focus on the focusing screen or, in

Live View mode, on the monitor.

• In the top panel display, the distances for the set focus (

FOCUS), and

for the front (

FRONT) and rear (BACK) limits of the depth of ﬁeld range

are displayed when the shutter button is pressed to the pressure point.

In Live View mode you can call up an enlarged detail as a setting aid.

1. In the menu, under

SETUP , select the item Capture Assistants,

2. select

Manual Focus Assist in the sub-menu, and

3. select

On or Off there

• If the function is activated, a central detail magniﬁed 4x is dis-

played brieﬂy each time the setting ring on the lens is turned. The

detail can be moved using the Joystick.

Notes:

• Autofocus mode can be activated at any time also with manual setting

of the focus using the Joystick (see next section and the section on the

function of the Joystick on page 32).

• The Leica S is supplied as standard with a full matt screen with which

subject details can be reliably focused sharply over the whole image

ﬁeld. It is suitable for most photographic ﬁelds of application and

motifs. It is particularly beneﬁcial when working with longer focal

lengths and for macro photography. Further focusing screens are

available as accessories which oﬀer optimum setting conditions,

depending on the ﬁeld of application, and are easy to change.

AUTOMATIC SETTING

Two autofocus modes are available. The setting procedure for both is

initiated by tapping (1st pressure point) the shutter button.

AFs (single) = focus priority

The part of the subject you are aiming at will come into focus.

– After that, the process ends and the setting is saved even if you con-

tinue to hold the shutter release button at the ﬁrst pressure point.

– It is not possible to take a picture before it comes into focus, even if

the shutter button is pressed all the way down.

Note:

An AF setting can be stored not only with the shutter button, but also with

the Joystick.

AFc (continuous) = shutter release priority

The parts of the subject being photographed are fully focused.

– The process continues as long as the shutter release button is held at

the ﬁrst pressure point. While the button is being held down the cam-

era's settings are corrected, so other objects at other distances may

be recognized by the metering system, or if the distance to the camera

of the part of the subject being photographed changes.

– A setting can only be saved by pressing the Joystick forwards.

– Even if no part of the subject is in focus, a picture can be taken at any

time.

Note:

AFc is not available in Live View mode.

With both AF operating modes:

You can intervene manually at any time even during autofocus mode by

turning the setting ring on the lens.

• In Live View mode the color of the metering crosshair in the monitor

changes from red to green when the focus has been correctly set.

Moving the autofocus metering ﬁeld in Live View mode

In Live View mode, the metering ﬁeld can be moved to any point of the

image ﬁeld with the Joystick.

In the two enlarged details, the detail is ﬁrst moved together with the

metering ﬁeld that remains in the middle. Only when the detail reaches

the edge of the image ﬁeld can the metering ﬁeld by moved to the edge

of the detail by pushing further.

Note:

If Spot is used as exposure metering method in Live View mode, its

metering ﬁeld is coupled to that of the autofocus, i.e. both metering ﬁelds

are then moved.

Inhalt_EN.indd 29 20.08.2015 14:14:44

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S 007 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S 007

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info