Bedienungsanleitung Leica S 007 (Seite 36 von 72) (Englisch)

594983

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Recording mode

METERING MEMORY LOCK

The shutter button and/or the Joystick can be used to save the exposure

setting (for

P , A and T) and the automatic focus (AF), depending on the

various menu settings.

General notes on the storage function

– With the shutter button:

• Only the

AF setting can be stored, and only in AFs operating mode.

• The storage function of the shutter button always applies to only

one picture.

– With the Joystick:

• The exposure and

AF settings can be stored. Various function

combinations are available which you deﬁne via the menu control.

• The storage function of the Joystick is retained as long as it is held

pressed forward, i.e. over any number of pictures, and irrespective

of whether the shutter button is also pressed at the same time.

• The storage function of the Joystick applies to both the

AFs and the

AFc operating mode.

Saving with the shutter button

1. Focus on the part of the subject to be metered with the crosshair

the viewﬁnder

2. Press the shutter button to the ﬁrst pressure point. The value stored

is retained as long as this pressure point is held.

3. While holding the pressure point, determine the ﬁnal picture detail

and take the

4. picture.

Metering memory lock is canceled when you remove your ﬁnger from the

shutter button pressure point.

Saving with the Joystick

Setting the function combinations

1. In the menu, under SETUP , select the item Customize Controls and

2. select

AF/AE Lock Button in the sub-menu

• A further sub-menu appears.

In this sub-menu select whether you wish to set the function for

In AF

Mode or In MF Mode set via the menu

In AF mode

3. In the AF-Mode sub-menu, select one of the three variants

Eﬀect of the three function variants:

–

AF/AE lock (factory setting)

– Shutter release button:

AFs setting

– Joystick: Exposure setting,

AFs/AFc setting

–

AE-L

– Shutter release button: AFs setting

– Joystick: Exposure setting

–

AF-L

– Shutter release button:

AFs setting

– Joystick:

AFs/AFc setting

In MF mode

In manual focus mode you can nevertheless activate AF mode temporar-

ily, i.e. for the particular picture, and/or – depending on the setting - to

save the exposure setting by pressing the Joystick forwards.

3. In the

MF-Mode sub-menu, select one of the ﬁve variants

Eﬀect of the ﬁve function variants

–

AFs On / AE Lock (factory setting)

AFs mode activated for one picture, saving of the exposure setting

The resulting AF setting remains stored until it is changed by manual

adjustment or by pressing the button again.

–

AFs on

– As for AFs On / AE Lock, but without saving of the exposure setting

–

AFc On / AE Lock

As for AFs On / AE Lock, but with AFc mode

–

AFc on

As for AFs On / AE Lock, but without saving of the exposure setting

–

AE-L

Saving of the exposure setting

Displays in the viewﬁnder during saving of the exposure setting

• A light balance appears showing the deviation from the stored metered

value.

• If aperture and/or exposure time are changed during this time, the

respective other value is adapted accordingly and displayed.

EXPOSURE COMPENSATION

Exposure compensations are possible in automatic program, shutter

speed priority and aperture priority modes.

Entering and canceling an exposure compensation in the menu

1. In the menu under CAMERA, select the item Exp. Compensation.

• The sub-menu shows a scale with a setting mark highlighted in

red. If it is at a value of

O, this means that the function is deacti-

vated.

2. Set the desired value by turning the rear thumbwheel or by pressing

the Joystick to the left or right.

• In the initial menu list, a set compensation is indicated by

EV+X

Note:

In the factory setting, this function can be called up directly by holding

the button bottom right next to the monitor depressed.

Displays in viewﬁnder and top panel display, and in Live View

mode also in the monitor (in the picture data display)

– The compensation value on the light balance (viewﬁnder and monitor)

– A corresponding warning symbol (viewﬁnder)

–

+ or - (top panel display)

Notes:

• Once set, a compensation value is retained even when the camera is

switched oﬀ.

• An exposure compensation set on the camera only inﬂuences meter-

ing of the available light, i.e. not ﬂash light (for more information about

ﬂash photography, refer to the respective sections).

Example, either plus or minus, "X" stands for the respective value

Inhalt_EN.indd 32 20.08.2015 14:14:44

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S 007 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S 007

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info