Bedienungsanleitung Leica S 007 (Seite 37 von 72) (Englisch)

594983

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Recording mode

MANUAL SETTING OF APERTURE AND EXPOSURE TIME - M

Setting the operating mode

1. Select M with the rear thumbwheel (see also p. 30, "Exposure con-

trol")

2. Set the desired aperture by turning the rear thumbwheel and the

desired exposure time with the shutter speed setting dial

Displays in viewﬁnder and top panel display, and in Live View

mode also in the monitor

•

M for the selected exposure operating mode,

• The manually set aperture and shutter speed values, and

– A light balance with which the exposure compensation is performed.

The light balance shows the deviation of the shutter speed/aperture

combination just set from the metered exposure value. In the range of

±3 EV, the deviation is shown clearly in

⁄2EV steps. Larger deviations

are indicated by ﬂashing of the outer mark of the light balance.

For correct exposure according to the exposure meter, vary the aperture

and/or speed until only the zero mark of the light balance lights up.

Note:

If the automatic sensitivity setting (

ISO Auto) is activated at the same

time, the last manually set sensitivity is used. A minimum shutter speed

that may have been set, however, is not active.

BRACKETING

Bracketing can be employed with all four exposure operating modes.

The following are available:

– 2 numbers of pictures: 3 or 5

– Graduations: 0.5EV, 1EV, 2EV and 3EV

Setting the function

1. In the menu under CAMERA, select the item Exp. Bracketing

• The sub-menu appears on the monitor with the four items Exp.

Bracketing, Frames, F-Stops and Automatic, and below this a

scale. If an exposure compensation is set at the same time, this is

indicated by a corresponding value below the scale.

2. For

Exp. Bracketing, turn the rear thumbwheel or press the Joystick

to left or right to select whether you wish to carry out bracketing (

On)

or not (

Off)

• If

On is selected, the other three sub-menu items are activated (=

white).

3. Press the rear thumbwheel or the Joystick forward to call up the next

sub-menu item (the same applies to all sub-menu items)

4. In

Frames, set the number of frames, and in F-Stops the desired

exposure graduations between the pictures of the series

• The selected exposures are displayed in red on the scale. An

exposure compensation that may be set is recognizable from the

fact that the whole series around the compensation value is "oﬀ-

set" from the middle of the scale.

5. In

Automatic, select whether you wish to trigger the pictures individu-

ally yourself (

Off), or whether the pictures should all be taken in series

when the shutter button is pressed once (

On)

• A set exposure series is indicated in the initial menu list by

X / Y

6. All pictures are produced by pressing the shutter release button once

or several times.

Note:

The function

Exp. Bracketing is not available if an interval shooting series

has previously been set.

" X " stands for the number of pictures, " Y " for the graduation

Displays in the viewﬁnder

– A warning symbol

– The changing displays for shutter speed and aperture corresponding to

the graduations

Displays in the top panel display

– Next to the exposure mode in front of the overexposure(s)

+ , in front of

the uncorrected picture

0, in front of the underexposure(s) -

– A symbol indicating an exposure series

Displays in the monitor (in the picture data display)

– A symbol indicating an exposure series

THE B SETTING

With the B setting, the shutter remains open as long as the shutter button

is held depressed (max. 60s).

Display in the viewﬁnder

–

bulb instead of a shutter speed

Display in the top panel display

–

– After opening of the shutter, the running exposure time

Displays in the monitor in Live View mode

–

bulb instead of a shutter speed

In conjunction with the self-timer, a T function is also available: If both

is set and the self-timer is activated by pressing the shutter release

button, the shutter opens automatically after the selected delay time. It

then remains open until you press the shutter release button a second

time – you do not need to hold the button down. This enables you to

largely prevent any blurring, even with long exposures, by pressing the

shutter release button. In both cases the exposure meter remains deacti-

vated.

Inhalt_EN.indd 33 20.08.2015 14:14:44

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S 007 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S 007

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info