Bedienungsanleitung Leica S (Seite 53 von 78) (Englisch)

585256

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

3. The numbers and letters are changed by turning the click wheel (1.18)

or pressing the joystick (1.17) up or down, and other characters are

selected by pressing the click wheel or pressing the joystick inwards,

left or right.

The available characters are upper case letters from A to Z, numbers

from 0 to 9 and a space _ ; you can scroll through them in this order in

an endless loop.

4. Conﬁrm your settings by pressing button (1.18), in this case labeled OK

or by pressing the click wheel or moving the joystick inwards after set-

ting the last character.

• A further submenu appears containing the query Reset image num-

bering?.

5. Select Yes or No.

• Once you have conﬁrmed your selection by pressing the click

wheel or the joystick forwards, the setting menu described under 2.

appears again.

Note:

You can also reset the picture numbers without creating a new folder

ﬁrst. To do this, select Reset in the picture numbering submenu and pro-

ceed as described in 4. and 5. above.

Changing ﬁle names

1. In the SETUP menu (see p. 17/26), select Image Numbering (5.19), and

2. then Change filename in the associated submenu.

• The ﬁle name appears. The ﬁrst character (initially always LXXXXXX1)

is marked as ready for editing.

Characters 1-4 can be changed.

3. The numbers and letters are changed by turning the click wheel (1.18)

or pressing the joystick (1.17) up or down, and other characters are

selected by pressing the click wheel or pressing the joystick inwards,

left or right.

The available characters are upper case letters from A to Z, numbers

from 0 to 9 and a space _; you can scroll through them in this order in

an endless loop.

4. Conﬁrm your settings by pressing the click wheel or by pressing the

joystick inwards.

• The initial menu list appears.

FORMATTING THE MEMORY CARD(S)

It is not normally necessary to format (initialize) a memory card that has

already been used. However, when an unformatted card or a card format-

ted in another device (e.g. a computer) is used for the ﬁrst time, it must

be formatted.

Important:

When formatting, all existing data on the card is not necessarily irretriev-

ably lost.

It may be possible to access some of the data again using appropriate

software. Only the data that is then overwritten by saving new data is

actually permanently deleted.

Notes:

• Do not turn the camera off while memory cards are being formatted.

• If the memory card has been formatted in another device, such as a

computer, you should reformat it in the Leica S.

• If the memory card cannot be formatted, you should ask your dealer or

Leica Information Service (address, see p. 74) for advice.

• Even protected pictures (see previous section) are deleted when for-

matting the memory card.

Setting the function

1. In the SETUP menu (see p. 17/26), select Format (5.20), and

2. then which of the two cards you want to format, or both, in the sub-

menu.

• To prevent unintentional settings, a corresponding query appears in

the monitor.

3. Press the click wheel (1.18) or the joystick forwards (1.17) to conﬁrm

that you really want to format the memory card(s).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info