Bedienungsanleitung Leica S2 (Seite 31 von 89) (Englisch)

585257

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

Signal tones

On the LEICA S2, you can decide whether you want messages or

autofocus mode (see p. 33) to be acknowledged by acoustic sig-

nals - two volume levels are available - or whether you prefer the

camera to operate largely silently.

A beep is used as an acknowledgement, and can be activated

individually in autofocus mode to confirm that the setting has

been made and to indicate a message.

Note:

By factory default, the signal tones are deactivated.

Setting the functions

1. In the SETUP section of the menu (see p. 13/22), select

Acoustic Signal (5.27)

2. Call up the submenu. It consists of the 3 items Volume,

AF-Confirmation and Warnings.

3. Select Volume,

• A further submenu appears containing the 2 alternatives

High and Low.

4. Choose the desired function from this submenu.

• After confirmation, the initial monitor screen appears

again.

5. In the other two submenus, choose whether or not you want

to activate the tones for the respective functions.

Selecting On

For AF-Confirmation a signal sounds as soon as the focus is set

correctly, either automatically or manually, i.e. in conjunction

with the indicator 2.9b lighting up in the viewfinder (see p. 9).

For Warnings a signal sounds for all messages and warnings

that appear in the monitor (1.22), and when the self timer func-

tion is used (see p. 40).

Selecting Off for Warnings

Even if you select Off, an acoustic warning signal will sound in

two situations:

• if the door (1.25) of the memory card slot is opened while

transferring data (see p. 17)

• if the shutter will close again at the end of the sensor cleaning

process (see p. 58)

Monitor and top panel display

The LEICA S2 has two displays

- A colored OLED (organic light emitting diode) display (1.11),

and

- A large 3” liquid crystal color monitor (1.22).

- The top panel displays shows (see „Displays / In the top panel

display“, p. 10) the most important basic information about the

status of the memory card(s) and the battery, as well as for

exposure control. The monitor is primarily used for viewing pic-

tures recorded on the memory card(s) and reproduces the en -

tire field of the picture plus the selected data and information

(see „Displays / In the monitor“, p. 9). It can also be used to

either

- Display more image data in addition to the picture (see „Dis-

playing the picture data“ on this page) und a histogram (see

„Histogram“, p. 47),

- A comprehensive list of the most important picture parameters

currently set (see „Displays/In the monitor/4.3 Picture data

review“, p. 12).

On the LEICA S2-P version, the monitor is protected by an ex-

ceptionally hard, and therefore scratch-resistant, sapphire

glass cover.

Note:

A monitor image is only available in play mode (see p. 46). If ther

Auto review function is active (see p. 12) it is automatically turned

on.

Both displays can be adapted to the relevant situation, i.e. the

prevailing lighting conditions. The top panel display has adjust -

able brightness, while the monitor also has backlighting. The

brightness of the monitor is automatically adjusted depending

on the external brightness. This is done by the sensor 1.14.

Setting the functions

1. In the SETUP section of the menu (see p. 13/22), select

Monitor/Display (5.27)

2. In the first submenu choose whether you want to set the

monitor – Back Plane, or the top panel display –

Top Cover,

To set the monitor:

3. In the second submenu, choose whether you want to set the

Brightness or Backlight and

4. finally set the desired level in the relevant submenu. Three

levels are available for the Brightness , while for Backlight

there are five plus an additional automatic setting.

To set the top panel display:

3. In the second submenu, select Top Cover, and finally

4. set the desired level.

Signal tones / Monitor and top panel display / 27

Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S2 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info