Bedienungsanleitung Leica S2 (Seite 33 von 89) (Englisch)

585257

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

White balance

- Auto – For automatic control, which provides neutral results in

most situations,

- Seven fixed presets for the most frequent light sources,

- e.g. for outdoor pictures in sunshine,

- e.g. for outdoor pictures in cloudy conditions,

- e.g. for outdoor pictures with the main subject in

shadow,

- e.g. for indoor pictures with (prevailing) incandescent

light

- e.g. for indoor pictures with (prevailing) light from

fluorescent tubes with warm light color

- e.g. for indoor pictures with (prevailing) light from

fluorescent tubes with cool light color

- e.g. for pictures with (prevailing) electronic flash

illumination

- Manual Metering– For manual setting by metering and

- Color Temperature

– For a directly adjustable color tempera-

ture value.

Note:

When using the LEICA SF58 or electronic flash units that meet

the technical requirements of System Camera Adaption (SCA)

for the System 3000 and have an SCA-3502 adapter (version 5

onwards), the white balance can be set to Auto to achieve

correct color reproduction.

However, if other flash units are used, which are not specially

designed for the LEICA S2, the setting should be used.

All color temperatures are specified in Kelvin.

Setting the function

For automatic or fixed settings

1. In the IMAGE section of the menu (see p. 13/22), select

(5.11), and

2. in the associated submenu the desired function.

For direct setting of color temperature

You can directly set values between 2000 and 13100 (K1) (from

2000 to 5000K in increments of 100, from 5000 to 8000K in

increments of 200 and from 8000 to 13,100K in increments of

300). This provides you with a broad scope, covering almost all

color temperatures that can occur in practice and within which

you can adapt the color reproduction very sensitively to the exi-

sting light color and/or your personal preferences.

1. In the IMAGE section of the menu (see p. 13/22), select

White Balance (5.11)

2. in the subsequent submenu select the Color Temperature

option, and

• A further submenu entitled White Balance Kelvin Setting

appears, containing the value to be set, which is indicated

by a red border.

3. then the desired value.

For manual setting by metering

1. In the IMAGE section of the menu (see p. 13/22), select

White Balance (5.11), and

2. in the subsequent submenu select the Manual Metering

option.

3. Press the click wheel (1.17).

The message Attention Aim the camera at a white surface

and press the shutter release button appears in the moni-

tor.

4. The actual setting is made by subsequently taking a picture in

which you must aim at a white or neutral gray surface in the

center of the picture.

• The picture you have just taken will appear in the monitor

instead of the menu and will contain the message White

balance set.

However, if the exposure is found to be insufficient, an

error message appears. In such cases, repeat step 2 with

the correct exposure setting.

A value set in this way remains stored and will be used for all pic-

tures until it is superseded either by a newly metered value, or

you use one of the other white balance settings.

White balance / 29

Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 29

FIRMWARE

UPDATE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S2 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info