Bedienungsanleitung Leica S2 (Seite 36 von 89) (Englisch)

585257

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

32 / Shutter release button / Serial exposures

Record mode

Shutter release button

The LEICA S2 has a three-stage shutter release button (1.1):

1. A brief tap activates the distance and exposure metering

systems, as well as the displays in the viewfinder and the top

panel. If the shutter release button is held at this pressure

point, the metering systems and displays remain active.

When you let go of the shutter release button, the metering

system and the displays remain activated for around a further

12s.

Notes:

• If play mode was previously set (see p. 46), when you tap the

shutter release button the camera reverts to record mode, if

it was previously in standby mode (see p. 26), it is reactivated,

i.e. metering systems and displays are turned on.

• The shutter release button remains blocked

- if the internal buffer memory is (temporarily) full,

e.g. after a series of up to 10 pictures,

- if the memory card(s) inserted is/are full and the internal

buffer memory is (temporarily) full, or

- if no memory card is inserted and the internal buffer

memory is full.

2. Pressing the shutter release button to the first pressure point

and holding it in this position stores the metered exposure

value in , and modes (see p. 38/39). When using

autofocus in AF s - sharpness priority - mode (see p. 33) this

simultaneously stores the focus setting.

After the shutter release button has been let go, new measure-

ments can be carried out.

Note:

You can also use the menu to set button 1.17 to store the metered

exposure value and/or the automatic focus setting (see p. 35).

3. Pressing further releases the shutter or starts any preselected

self-timer delay time (see p. 40).

Serial exposures

You can use the LEICA D-LUX S2 to take single pictures and

also to produce sequences of pictures.

Einstellen und Anwenden der Funktion

1. In the CAMERA section of the menu (see p. 13/22), select

Drive Mode (5.1) And

2. then select Continuous in the submenu.

3. The subsequent functioning is determined by how you operate

the shutter release button:

- A series of pictures is taken for as long as you hold down

the shutter release (provided that the memory card has

sufficient capacity).

- If you press the shutter release button briefly, the camera

continues to take single pictures.

Note:

Regardless of how many pictures have been taken in a series,

both play modes (see p. 24) initially show the last picture in the

series or the last picture in the series saved on the currently

active card (see p. 31), if not all of the pictures in the series have

been transferred from the internal camera memory to the rele-

vant card yet.

Details of how to select other pictures in the series, as well as

further review options, can be found in the sections under

„Review mode“ starting on p. 46.

Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 32

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S2 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info