Bedienungsanleitung Leica S2 (Seite 38 von 89) (Englisch)

585257

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

34 / Exposure metering methods / Spot metering

Exposure metering

Exposure metering methods

The LEICA S2 provides three different exposure metering

methods:

Setting the function

1. In the CAMERA section of the menu (see p. 13/22), select

Exposure Metering (5.3) and

2. in the associated submenu, select the desired option.

Spot metering -

For spot metering, only the metered value from the center field

is used.

Center-weighted metering -

Center-weighted metering uses all metered values but they are

weighted differently than with multiple field metering.

This metering method takes account of the entire image field,

although the parts of the subject situated in the center have

more influence on the exposure value calculation than the

areas at the margins.

Multiple field metering -

This metering method is based on recording five metered

values. One value is determined in a field in the center of the

image, the other four in the surrounding fields. An algorithm is

used to calculate these five measured values according to the

situation.

Symbols only appear in the viewfinder (see p. 9)

Metering memory lock

The LEICA S2 records

- different parts of the subject during exposure metering,

depending on the metering method, and weights them differ -

ently,

- only part of the subject with autofocus metering (see p. 33).

The values are initially always stored using the shutter release

button (1.1, see p. 32). Depending on the setting in the menu,

you can use button 1.17 to either

- retain one of the (stored) settings even if you let go of the shut-

ter release button, e.g. to store different exposure and/or

focus settings by pressing to the pressure point again, or

- store the setting not stored with the shutter release button.

In contrast to the shutter release button, button 1.17 stores the

relevant settings not just for one picture but also for as long as

it is held down, i.e. possibly for several pictures.

The AE-/AF-Lock (Automatic Exposure / AutoFocus) option in

the menu is used to select the assignment of the functions.

Storing with the shutter release button

1. Aim the circle in the viewfinder at the area to be metered.

2. Press the shutter release button (1.1) to the 2

pressure

point. As long as the button remains depressed, the value is

stored.

3. In the automatic exposure modes , and (see p. 38/39)

the light balance appears (2.7b) and shows the variation

from the stored measured value. If the aperture or shutter

speed is changed during this time, the other value adjusts

accordingly and is displayed.

4. While keeping the shutter release button at the pressure

point, compose the final picture detail and

5. Then release the shutter.

The storage is cancelled when the shutter release button is let

go from the pressure point.

Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 34

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S2 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info