Bedienungsanleitung Leica S2 (Seite 39 von 89) (Englisch)

585257

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

Storing with button 1.17

Setting the function

4. In the SETUP section of the menu (see p. 13/22), select

AE-/AF-Lock (5.30), and

5. then select one of the following options in the submenu:

- AF-L (AF Lock)

The shutter release button stores the exposure and autofo-

cus setting. Holding down button 1.17 maintains storage of

the autofocus setting even if you let go of the shutter release

button. Special case: If the camera is set to this function and

manual focusing (see p. 33), autofocus works in release pri-

ority mode (see p. 33) as long as the button is held down.

- AE-L (AE Lock)

The shutter release button stores the exposure and autofo-

cus setting. Holding down button 1.17 maintains storage of

the exposure setting even if you let go of the shutter release.

- AF-L + AE-L

The settings stored using the shutter release button for the

relevant picture are retained for as long as the button is held

down. Special case: If the camera is set to this function and

manual focusing (see p. 33), autofocus works in release

priority mode (see p. 33) as long as the button is held down.

Exposure compensation

Entering and cancelling an exposure compensation

1. In the CAMERA section of the menu (see p. 13/22), select

Exposure Compensation (5.4).

• A scale with a red arrow above it appears in the monitor. If

this arrow is pointing to a value of O, this means that the

function is deactivated.

2. Turn the click wheel (1.18) to set the desired value in the sub-

menu.

• A set compensation is indicated by EV±X

in the initial

menu list.

The viewfinder shows

– the corresponding warning symbol (2.2).

The top panel display shows

– + or - (3.9a), depending on the compensation direction

Note:

Once set, a compensation value is retained even if the camera is

turned off.

Important:

An exposure compensation value set on the camera influences

only metering of the available light, i.e. not the flash light (for

more details on flash photography, refer to the sections starting

on p. 43).

Example, either plus or minus, „X“ stands for the relevant value

Bracketing

The following are available:

- 4 graduations: 0,5EV, 1EV, 2EV and 3EV

- 2 numbers of pictures: 3 or 5

Setting the function

1. In the CAMERA section of the menu (see p. 13/22), select

Exposure Bracketing (5.5).

• The submenu appears in the monitor and contains two opti-

ons – Number of Frames and Aperture Stops - with a scale

below them. The setting for Number of Frames is marked as

ready for editing. If exposure compensation is set at the

same time, this is indicated by a corresponding value below

the scale.

2. For Number of Frames turn the click wheel (1.18) to select

whether you want to produce a bracketing series and the

number of pictures.

• The corresponding number of red arrows appears above

the scale. They specify the relevant exposure values.

Note:

If an exposure compensation is set at the same time, the zero

exposure, i.e. the starting point of the bracketing series, corres -

ponds to the compensated exposure value in , and

exposure modes (see p. 38/39).

Metering memory lock / Exposure compensation / Bracketing / 35

Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 35

FIRMWARE

UPDATE

FIRMWARE

UPDATE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S2 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info